Jump to content

Spektrum NX transmitter; Setting voice volume on alerts

David Pearce 4

Recommended Posts

I've recently purchased an NX8 and, although I'm generally delighted with it, I am having one problem.


I have set up a timer on Timer 1 to count back from 8 minutes and have set the "Timer Event Alerts" menu to "Voice" for "Every Minute Down". This works but the voice is too low a volume to be heard while flying.  I adjusted the volume in the "Voice Volume Menu" for Warnings and Timer to 100 but this makes no difference. Setting up the R knob as a volume control works but it also increases every tone and bleep the TX makes to a level that would make me very unpopular at the flight line!


Does any NX user know how I can increase the volume of the voice without the other tones and bleeps?



Link to comment
Share on other sites

Thanks for that Dennis.

I did realise that I also needed to set the main volume, the one you set by hitting the back button while on the main screen. That appears to over-ride all others. There is a surprising amount of screens you need to go to to inhibit all the other bells and whistles, but now I have managed to set it so I fly with the voice for the timer plus "Motor on/Motor off" for the throttle cut and tone for the trims.


Thanks again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...