David Hall 9 Posted December 18, 2021 Share Posted December 18, 2021 This year, I plan to get a couple of my 2m RES kits built, to have a go in the comps that have been organised for 2022. The kits I have are the RES Eagle and the Kavan RESCO (similar to the Circle Dancer). These have a single spoiler. I have a few servos in hand that I would like to use. These are the Blue Arrow D05010MG 6g servos that can produce 1.2Kgcm (but they look quite small). How much torque does the spoiler servo need? Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted December 18, 2021 Share Posted December 18, 2021 I've got a ripmax servo in my Circle Dancer, it produces about 1.2 Kg cm at 4.8 volts and its fine. Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted December 18, 2021 Share Posted December 18, 2021 2 minutes ago, Shaun Walsh said: I've got a ripmax servo in my Circle Dancer, it produces about 1.2 Kg cm at 4.8 volts and its fine. That's a Ripmax SD100, the other important thing is size, anything more than 8mm thickness would be hard to fit in the circle dancer wing. 1 Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted December 18, 2021 Share Posted December 18, 2021 Also, several club mates, have eagles and the spoiler linkage took some work to get it right. The circle dancer is easy to set up. 1 Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted December 18, 2021 Share Posted December 18, 2021 Also, I'm pretty sure that the Circle Dancer and the Resco are one and the same. Feel free to contact me if you want any more information. The fuselage is an easy build but the wing components are fragile until glued up, the main spar comprises over 20 components! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.