Andy J Posted January 7, 2022 Author Share Posted January 7, 2022 Will go the route of using wood then as that should be a lot cheaper. Any suggestion what air temperature to aim for when using a hot air gun for say with 1mm PETG. Quote Link to comment Share on other sites More sharing options...
leccyflyer Posted January 7, 2022 Share Posted January 7, 2022 I just heat the plastic up until it goes saggy, then place it down on the plug, switch on the vacuum and let it do it's thing - no idea what that temperature is though. 1 Quote Link to comment Share on other sites More sharing options...
PatMc Posted January 9, 2022 Share Posted January 9, 2022 I think this thread from 2014 is well worth revisiting for anyone thinking of "homespun vacuum forming". I might even finally get around to completing a frame myself. ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.