Bonzo Moon Posted March 1, 2022 Share Posted March 1, 2022 A little project I did to use a spare Lidl chuck glider foam wing I had kicking around. Scale up the foamboard Flight Test Mini-Mustang and give it a better wing. Not as easy as I thought it would be! https://www.youtube.com/watch?v=UXCLyCqhlTk&list=PLLdle7NDE_1Y_XC3kjOSIUDJcRxVrhez-&index=1 Quote Link to comment Share on other sites More sharing options...
EarlyBird Posted March 1, 2022 Share Posted March 1, 2022 Quote Link to comment Share on other sites More sharing options...
EarlyBird Posted March 1, 2022 Share Posted March 1, 2022 Can't beat working in a warm kitchen.? Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted March 1, 2022 Author Share Posted March 1, 2022 Too right! Peeing with rain outside (again) and there's not room to swing a cat in my cold garage! Quote Link to comment Share on other sites More sharing options...
SIMON CRAGG Posted March 2, 2022 Share Posted March 2, 2022 Well done Bonzo, I am on my fourth FT foamboard model thx to your enthusiasm with the Vulcan!. Building the FT Versa blunt nose at present, modified for 4s and 70mm Lipo. Should be fun!. Quote Link to comment Share on other sites More sharing options...
Bonzo Moon Posted March 2, 2022 Author Share Posted March 2, 2022 Versa is great, though I found difficult to get the CG in the right place, hence I added a nose to mine which worked well. Not easy to throw too unless you're good at boomerang launch (and I'm not.) Video of the nose job, wheels I added and maiden are below! Did you see my Versa with a nose job and undercarriage video too? The maiden. Prop was too big and hit the ground , but flew like a demon! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.