john stones 1 - Moderator Posted March 29, 2022 Author Share Posted March 29, 2022 Well I enjoyed it and learnt a bit, well done to all involved. ? 2 Quote Link to comment Share on other sites More sharing options...
Martin Harris - Moderator Posted March 29, 2022 Share Posted March 29, 2022 +1 Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted March 30, 2022 Share Posted March 30, 2022 Quite an enjoyable talk. Considering that castor was recommended for the original Lasers, it was good to here from Neil that he doesn't let it anywhere near his engines. Quote Link to comment Share on other sites More sharing options...
Chris Walby Posted March 30, 2022 Share Posted March 30, 2022 11 hours ago, Frank Skilbeck said: Quite an enjoyable talk. Considering that castor was recommended for the original Lasers, it was good to here from Neil that he doesn't let it anywhere near his engines. Then was then and now is now (not castor), the materials use and clearances in old engines is different to modern engines + increased performance/reliability achieved nowadays. Interesting to see Neil tested supercharging and that reliability and usability were the focus over just out and out power. Not sure about steel rockers, but can see the logic for model engines. We were using synthetic oil in motorcycle racing 2 strokes at 40:1 and some even went as far as 80:1 (within the recommendation of the oil manufacturer) in the mid 1980's. A motorcycle speedway engine manufacturer even produced (very successfully) methanol engines without total loss oil lubrication by employing semi wet sumps although the engines were rarely inverted on purpose! I picked up on the point that Laser engines are built to last even with a wide range of operator skill. Lets hope one day we could get Jon to talk about the Laser inline and flat twin developments of recent times + the testing of lower oil content fuel and its advantages. Oh and those petrol thingies... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.