Ian Whittaker Posted March 21, 2022 Share Posted March 21, 2022 I’m trying to use a spare Align esc (RCE-BL100A) in a fixed wing model. I got the esc (new) as part of a combo but didn’t use it in the helicopter, so it’s been sat around for a little while. The snag is it’s set up in helicopter mode - is there a way I can turn it into a fixed wing esc? At present it’s got the soft start and governor features enabled (amongst others I believe) which are not needed / desirable in its new task. I think I could do this with the Align programming gadget but wondered if there’s a work-around? I’ve asked at my local club but as a electric heli-guider I’m a minority! thanks all, ian. Quote Link to comment Share on other sites More sharing options...
EarlyBird Posted March 21, 2022 Share Posted March 21, 2022 20 minutes ago, Ian Whittaker said: Align programming gadget Do you mean a programming card? I had this issue with a YEP ESC that came set up for helicopter which I did not realise until my fixed wing model was in the air. The only way to change to fixed wing was with a programming card. Found the manual. G20525 RCE-BL 100A.pdf Looks easy enough, as you say gadget. ? Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.