Nigel R Posted March 26, 2022 Share Posted March 26, 2022 As title. I am in need of an adaptor to allow a carb with 13.5mm spigot to fit inside a 15mm neck. The 15mm fitting uses a pinch bolt to hold the carb so i guess the adaptor would need to be split to allow it to clamp the carb. Does anyone know anyone who can turn such a thing on a lathe? Quote Link to comment Share on other sites More sharing options...
Keith Berriman Posted March 26, 2022 Share Posted March 26, 2022 Give Just Engines a ring on Monday they used to make loads of adaptors for their carbs to fit other engines Quote Link to comment Share on other sites More sharing options...
Paul De Tourtoulon Posted March 26, 2022 Share Posted March 26, 2022 Come on there must be a modeliste or friendly turner near to you, it's a 15 minute job,,,, Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted March 28, 2022 Share Posted March 28, 2022 Pm sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.