Geoff S Posted April 22, 2022 Share Posted April 22, 2022 I built a Liddle Stik from a free plan back in 2020 so when I saw this Micro-Stik on eBay last week I gave in to temptation and bought one. It's nicely CNC cut kit with a clear CAD drawing. . The parts came well packed with a clear drawing. Within a day I'd built the 30" wing (mostly) I temporarily mocked up the fuselage on my magnetic building board. This isn't really a complete kit and there are a few minor issues - I suppose most are my personal preference. I've added inter-spar webs and I'm thinking about cap strips on the wing ribs. I haven't started the fuselage but I think I'll add triangular stock at the join of the bottom sheet and the sides as they're only 1.5mm sheet and the glueing area is small. If I do that, I can round off the fuselage corners to both to offset the extra weight and improve appearance. I assumed I had a suitable motor/esc somewhere in my stock but it seems not. I'm Ok for very light (indoor size) models as well as bigger ones but this need about 150/200 watts and the only motors I have are either much too small or too heavy. It looks like I'll have to buy a 1200 kv motor weighing around 70 grams - probably running on a small 1 AH 3S battery. The wing area is only 1.5 squ ft so it doesn't want to be heavier than 1.5 lbs ish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.