Graham Foster Posted May 12, 2022 Share Posted May 12, 2022 Does anyone know what make this is? It works very well but I would like a manual for it Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted May 12, 2022 Share Posted May 12, 2022 That is the same pattern of About half a dozen easy to use giros Graham It goes between your receiver and your servos And needs mounting flat below or around your wing tube/ C of G With the leads to the rear of the model, as the Aeroplane Symbol on the microchip is showing you the orientation. The round pots need setting for Gain at about midway, so turn each fully forward and back, to find the middle. 1SW is your On/ Off switch normally set to Ch 5 or Aux1 on your tranny. Go fly it Quote Link to comment Share on other sites More sharing options...
Graham Foster Posted May 12, 2022 Author Share Posted May 12, 2022 Thanks Denis, I wasn’t sure about the 1SW outlet. On my other gyros a 3 position switch can change the operation of the gyro, I guess this is just on or off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.