Chris King 3 Posted May 16, 2022 Share Posted May 16, 2022 Hi, Apologies if this has been covered before, I did do a search but couldn't find anything. I have a RunCam2 and was wondering if I could power it from the receiver or more accuratley from the BEC of the Esc? Main reason is to reduce weight so I can mount it further forward on a Crash Test Hobbies Pinata wing. I wondered if anyone has sucessfully done this? Quote Link to comment Share on other sites More sharing options...
Seabee Posted April 2, 2023 Share Posted April 2, 2023 I run mine directly from a 3 cell lipo. Hasn't failed yet. Manual says 5 to 15volts supply. Quote Link to comment Share on other sites More sharing options...
Phil Green Posted April 2, 2023 Share Posted April 2, 2023 Not a Runcam, but I used to power my Flycam-1 via a servo lead. Quote Link to comment Share on other sites More sharing options...
Phil Green Posted April 2, 2023 Share Posted April 2, 2023 ...sorry what I meant was, if its a 5v camera, it should be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.