Frank Day Posted June 22, 2022 Share Posted June 22, 2022 Hi, Looking for some advice, I picked up one of the above for a spare DX6 G2. I also picked up a charging lead, 2pin to + & - banana. Plugging into a charger and setting to 2S LiIo produces a no balance lead warning and no charging. I did think of splicing a jack plug connector to the battery lead and to the socket hole in the battery cover but there is probably a simpler way. Thanks in advance Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted June 22, 2022 Share Posted June 22, 2022 Set the charger to "charge" not "balance charge" Quote Link to comment Share on other sites More sharing options...
Frank Day Posted June 22, 2022 Author Share Posted June 22, 2022 Hi Shaun, Thought I had tried that but had another go, one charger still says no balance lead and the other says connection break. Think i'll pass the battery on and buy a model specific one, cant be doing with the fuss. Thanks Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted June 22, 2022 Share Posted June 22, 2022 2s tx battery Quote Link to comment Share on other sites More sharing options...
Frank Day Posted June 22, 2022 Author Share Posted June 22, 2022 Thanks Shaun, I have a order for 4Max so I'll add this in.? Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted June 22, 2022 Share Posted June 22, 2022 I have actually charged the type of battery you have had problems with without any issues. Quote Link to comment Share on other sites More sharing options...
Zflyer Posted June 22, 2022 Share Posted June 22, 2022 The spektrum charger works a treat. Leave in TX hook up and job done. Quote Link to comment Share on other sites More sharing options...
Frank Day Posted June 22, 2022 Author Share Posted June 22, 2022 Unfortunately there is no charging provision within the DX6 for this battery, so a 2pin to banana cable is sold by Spektrum but neither of my chargers will recharge it, both identifying different faults Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted June 23, 2022 Share Posted June 23, 2022 Just a thought, have you tried charging at a low current setting, around 0.5 Amps? Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted June 23, 2022 Share Posted June 23, 2022 A friend had the same problem with his charger. He gave me the batteries and I tried them on my Imax 6 , they charged with no issues ? Are some makes of charger over sensitive? Quote Link to comment Share on other sites More sharing options...
Nigel R Posted June 23, 2022 Share Posted June 23, 2022 It's possible that a particular charger might insist on having the balance lead connected. And vice versa (apparently like your Imax 6, ED). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.