Robert Bromwich Posted December 6, 2009 Share Posted December 6, 2009 Hi all Whats happening is when the retracts are down and i switch the Tx then Rx on the retracts try to go up ,if model is on the ground they try but of course they cant/dont , only when i lift model of the ground do they go up then come back down even though switch is not touched and it's the same the other way round if there up and i switch TX then Rx on they come down then go back up ? is this normal !! when everything is switched on everything works fine i am using the dx7 with ar7000 rx with ubec as it's 4cell rob Edited By Robert Bromwich on 06/12/2009 22:18:49 Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted December 6, 2009 Share Posted December 6, 2009 Hi Robert, Try rebinding the Rx with the gear down. Quote Link to comment Share on other sites More sharing options...
Robert Bromwich Posted December 6, 2009 Author Share Posted December 6, 2009 Hi Doug Been workin hard all weekend and never even thought of that so will give it ago in the morning fingers crossed rob Quote Link to comment Share on other sites More sharing options...
Robert Bromwich Posted December 7, 2009 Author Share Posted December 7, 2009 thxs i have rebinded the Rx this morning and worked right away no problem so thanks again Doug for your help just the maiden to do now when we have some good weather rob Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted December 7, 2009 Share Posted December 7, 2009 No problem Rob Quote Link to comment Share on other sites More sharing options...
Stephen Grigg Posted December 7, 2009 Share Posted December 7, 2009 Thanks for that Ive the same set up and wondered why it did that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.