By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for onetenor

Here is a list of all the postings onetenor has made in our forums. Click on a thread name to jump to the thread.

Thread: Forum members' new models: Let's see them.
18/12/2018 22:35:19


18/12/2018 22:35:13


18/12/2018 22:35:08


18/12/2018 22:35:01


Thread: Glue for foamy?
18/12/2018 22:19:40

POR glues are available on E Bay.Amazon a lot cheaper and bigger tubes. Unbranded in white plain tubes. Works as well as UHUPor

Thread: Voltage sensor
09/12/2018 04:37:06

You may get better /more accurate info on Model boats Mayhem or Model Boats Website. The latter especially

Thread: Hinges for large scale models
02/12/2018 03:59:43

What about piano hinges. Plastic (nylon) or metal. just a thought.

Thread: Reach for the sky
25/11/2018 14:14:37

ANYONE interested at 2.30 today a programme about Kenneth More followed by his best known film REACH FOR THE SKY. BBC2

Edited By onetenor on 25/11/2018 14:25:47

Thread: Low wingers,very twitchy,recommend expo.YES/NO
24/11/2018 23:27:08

Sort out the geometry as stated by Tim and Don and use low rates .

Thread: Forum members' new models: Let's see them.
24/11/2018 23:16:38

Simon what is it please? Very nice BTW.

Edited By onetenor on 24/11/2018 23:17:54

Thread: Ebay sellers...
24/11/2018 23:00:49

External corrosion is easily dealt with. It's the internals that night be a problem.

Thread: mini lathes
11/11/2018 19:49:32

Wotcha peeps! I was thinking of getting a small lathe and saw these-- -----Is Raitool a good make? Can they handle steel and screw cutting?. With the right accessories of course. There are a number of sizes etc.if you scroll down. I would like the biggest one but I'm not sure I can afford it. Especially if it turns out to be unsuitable.

Any ideas welcome. Regards John

Thread: Flair conversion
10/11/2018 22:40:43

Shirring elastic makes good rigging wires.

Thread: Seagull Hurricane
08/11/2018 21:18:35

One must remember WW11 fighters were designed with quick elevator responses to start with so it's to be expected.

Thread: Biggles' Mess (the renamed cafe!)
08/11/2018 21:02:51
Posted by cymaz on 04/11/2018 12:11:05:
Posted by SR 71 on 04/11/2018 11:50:00:

A talented lady is Mrs Cymas that cake is a work of art

Tony I can vouch for that. My late wife and I used to make celebration cakes together. She was a bakers confectioner. I helped with lettering ,engineering etc. Well done Mrs C---.

Thread: Spray Paints
08/11/2018 16:13:43

This looks useful guys'n'dolls---

Thread: inverter generators
04/11/2018 23:33:49

Why not make your own glow fuel. Methanol etc are easy to get.

Thread: Fuel tank sizes
03/11/2018 06:37:00

Make one in card first to obtain patterns for the TIN PLATE (soup ,Beans etc tins.) If you want a simple way to get a slim one look for the bigger versions of sardine or pichard tins .Tinned herrings and kippers are bigger if you can find them.Solder a plate over the tear out place but fit your tubes in first. Easier when you can see inside. Oh yes don;t forget to boil them in detergent to remove the oil etc first. Test with a magnet as some are aluminium unless you fancy trying the alloy low temperature solders first 300 C solder available. I got some a while back but you will have to look on Amazon E bay for it I'm afraid as my memory is not good at present since losing my darling wife last month.

Thread: Pop bottle canopies and cowls
03/11/2018 06:06:33

Cooking oil bottles are good and come in many sizes.

Thread: Time to check your clunk
03/11/2018 05:43:35

Do you mean the clunk was rattling due to vibration from the engine. That's the only reason I can think of for a noisy clunk. If so check bearings and conrod fits. The rod looks nudged not cracked but check carefully under a good magnifying glass Also prop for balance, cracks etc. Re the clunk give it a rubbing with wet and dry to clean it up. Clean out the holes by blowing through with an airline or a pump. to avoid any abrasive going into the engine.. It doesn't matter if the chrome comes off. Just as an afterthought are the engine mounts secure. That can cause vibes if not. Take care.

P.S. Just had a look at no 1 piston . Is that a vertical crack I see? That could be the problem if it is cracked.

Edited By onetenor on 03/11/2018 05:48:53

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
Gliders Distribution
electricwingman 2017
Wings & Wheels 2019
Cambridge Gliding Club
Pepe Aircraft
Advertise With Us
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?


Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us