By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for minty morton

Here is a list of all the postings minty morton has made in our forums. Click on a thread name to jump to the thread.

Thread: Retford MFC Winter Swapmeet
01/11/2018 07:29:15
A great swap meet with lots of bargains at this time of year.
Looking forward to it. Building board cleared and ready.
Thread: UKCAA @ Retford - Rescheduled - now 5 August
24/07/2018 11:37:33
I'll be there and bringing 4 of Steve's models.
Minty.
Thread: Retford Model Flying Club Winter Swapmeet
12/10/2017 08:12:10

Looking forward to it. Always a good event.

Thread: Understanding Watt Meters
24/09/2017 07:50:29

Hi Mike , I have the 1100w version (same size different make) in a bullet with 10" prop on 4s and smaller KVA in an addiction X with 3s using i think a 13" prop.cant remember exactly the figures. I've got them at home if needed.

I think we need to sort the battery voltage problem out first.

But I'm a long long way off an expert.

Minty..

23/09/2017 16:53:53
Good point Simon. Too small a pack could well explain the voltage drop.
23/09/2017 16:51:18
Hi Mike. Something is wrong there. I use the same size motor and get close to 900w with 3s. The battery voltage is low and this could be the answer. Was the pack fully charged at the start of the test?
Hope this starts to get an answer.
Minty
Thread: UKCAA visit to Huddersfield MFC 2 September 2017
03/09/2017 16:10:39

Thanks to the host club and our members who made this a great day.

I for one hope for a return visit.

30/08/2017 07:40:03

I'm confirmed as coming now Steve.

Minty

Thread: Register Enthusiasm for the UKCAA Here
28/06/2017 10:04:18

Hi Richard and welcome, looking forward to meeting you.

Unfortunately I can't make Sunday's event due to being on holiday but looking forward to my home clubs event on the 16th at Retford.

Should be good if past events are anything to go by and the good weather has been effected, not that that has stopped us in the past!

Minty.

Thread: UKCAA at Huddersfield MFC
09/06/2017 08:15:07

Always a difficult call pal but with the best intentions.

I can't make basingbourn so my next event will be Retford. Roll on July.

Minty.

09/06/2017 07:30:19

To save anyone an in necessary trip this event has sadly had to be postponed due to the forecast of bad weather.

A revised date will hopefully be announced shortly.

Minty

09/06/2017 07:29:23

To save anyone an in necessary trip this event has sadly had to be postponed due to the forecast of bad weather.

A revised date will hopefully be announced shortly.

Minty

05/06/2017 07:38:20

I'll give it a go.

Minty

Thread: Trent 20 event 21 May 2017
21/05/2017 21:55:21

What a superb day!

Thanks everyone.

19/05/2017 07:12:08

Come on team Bullet !!!!

Only 90%!! Come on Tony.

17/05/2017 18:34:51

I'm really looking forward to Sunday.

Thread: Mystic 40/60FS
26/03/2017 08:39:33

Great to hear the maiden went well Martyn. Looking forward to seeing it at this years events pal.

Minty.

Thread: Retford Model Flying Club
12/02/2017 18:23:12

Looking forward to this one. Always a good meet.

Thread: Supra Fly 45
06/02/2017 11:26:58

Hi Nigel. Technique is to get the surface preped in the usual way then coat with thinned down pva, lay the paper then wet it through with the pva, remove as many wrinkles as possible and let it dry. Hopefully all the wrinkles have disappeared and it's stuck.

Now prime and spray.

I don't know compared to tissue and dope because it's so long since I did any but compared to film it's :-

More fiddly

Takes longer

Probably more expensive in the long run.

Heavier.

So why did I do it? Just fancied doing something different.

Would I do it again? Probably not.

Minty

06/02/2017 11:18:16

Thanks Martyn. A proper engine? Lol. Oh you mean that oily noisy thingy. Lol

Minty

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
electricwingman 2017
Slec
Wings & Wheels 2019
Sussex Model Centre
CML
Cambridge Gliding Club
CADMA
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us