By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Ace

Here is a list of all the postings Ace has made in our forums. Click on a thread name to jump to the thread.

Thread: New caption competition
13/07/2018 10:52:13

"look" If you land I have some new batteries for you.

Thread: Tom Neil
13/07/2018 09:26:52

For those who didn't know of him. - BoB pilot

**LINK**

Thread: New caption competition
10/07/2018 15:09:05

Fixed wing kite flouts new CAA laws.

Edited By Ace on 10/07/2018 15:27:11

Thread: Take off into wind ?
08/06/2018 19:10:47

Our patch is a circle so no problem with wind direction you would think. Fine if someone with common sense sets up first at 90', everyone follows thumbs up However if those lacking C S get set up first because its next to the path, getting them to shift another 60m round falls on the same ears as reminding them not to reach through the prop when connecting a battery while its sat on their lap angry

Thread: 1/12 Messerschmitt Bf 109
04/06/2018 09:03:01

Looking good Timo thumbs up

I use to make my 1/12th combat's from blue foam covered in brown paper, quick, cheap, disposable but no where near as pretty.

Thread: HK postage charges
01/06/2018 18:38:44

Watch out if buying from the global warehouse as anything over £15 will attract import duty and hostage collection fee from the carrier.sad

just looked and the Kinetic is out of stock in GB & EU warehouses.

Thread: Laser Single Cylinder Valve Timing.
30/05/2018 16:15:34

Like Martin I think its the RHS on a small capacity Laser. The LHS looks to be 180' out between exhaust/intake.

Where is Jon hiding when you need himcheeky

Thread: Radio systems
19/05/2018 11:14:23

+1 for BEB's sound reasoned advice yes

I started with a Futaba FF9 on 35Mhz and had a few glitches so switched to JR using DSM2 the early Spektrum protocol, which proved to be glitch free. I then purchased one of the last DX9's with dual DMS2 & DSMX. I personally have had absolutely no radio issues at all and it does everything I need and more reliably. Excluding dumb fingers & dodgy switches but hey that effects every make wink

One other major potential issue not mentioned so far that effects all makes concerns extension leads not securely fastened together, working loose or leads not pushed into receivers or making poor intermittent contact over time. I always use 100mm fly leads to help prevent this potential intermittent issue with thread, tape or plastic locks. Would appear in the air as a radio issue. Not saying it was but I genuinely don't believe their are any inherently bad major systems out their today.

Thread: See-through OS wankel rotary engine running slow-motion
16/05/2018 12:58:27

Knew the principle but to actually see it in action - fantastic, thanks for sharing.

Thread: Wot 4 Squared
09/05/2018 08:29:44

Watching with interest as I have a Mk 3 to start shortly thumbs up

Thread: PU Glue removal
08/05/2018 15:34:55

Thanks David, I thought the dark grubbyness was due to it attracting muck, however looking around there is some evidence of iron darkening PU type glues - you live an learn.

Resorted to using one of the foam emery sponges which shifted some - but not all. Guess I will just have to let nature run its course for the remainder.

08/05/2018 14:41:55

Thanks both, but the black grubby mark the diameter of a golfball is refusing to budge. sad

I guess the grease from the skin will eventually lift it but would dearly love a faster solution.

08/05/2018 11:33:30

I love PU glue and am normally very careful not to get any on my hands.

You know whats coming next - yes my latex glove sprung a leak and now I have some on my palm crying

Tried thinners, nail varnish remover & Isopropanol with no result - So what will shift it please ????

Thread: New TV Channel
08/05/2018 07:35:54

Are you accessing these through transmitted Freeview over the airwaves from a mast or via a Freeview internet link? Only my std airwaves Freeview doesn't show 94 no matter ow many times I re-tune it sad

05/05/2018 09:37:46

Tried retuning here in Yorkshire and nothing on Freeview 94 here sad

Thread: Peterf's 1/4 scale Falcon Models Tiger Moth
05/05/2018 09:27:43

Fascinating to follow to a superb end result and take my hat off of to you for taking the time to show and explain your techniques and problem solving thumbs up Just need to see it flying. smiley

Thread: Forum members' new models: Let's see them.
04/05/2018 14:25:10

Fascinating to follow to a superb end result thumbs up Just need to see it flying. smiley

Thread: The Ohmen
03/05/2018 18:48:49

If weight is needed and space allows what about paralleling up a pair of 2200 to give 4400 x 3s?

More useful weight with better duration.

Thread: Laser Engines - Technical questions
24/04/2018 10:31:47

Apart from UK and some of the colonies, I suspect the rest of the world uses Gasoline and even us Brits recognize the phrase, where as the Yanks/others probably wouldn't automatically recognize Petrol. Heart says P but head leans towards G. You may also wish to distinguish between 2 stroke and 4 stroke engines with FS.

My tuppence - Laser G25 FS

Thread: GTC by Levanter
23/04/2018 11:36:32

Levanter,

Going to sound lame but work and home work projects have taken priority with snatched flying days eating up what little free time was left. That said yesterday I did dust it off and make a start on the nacelle assemblies so moving forward again.

Ace

Latest Forum Posts
Support Our Partners
electricwingman 2017
Sussex Model Centre
Slec
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!