By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Garbo

Here is a list of all the postings Garbo has made in our forums. Click on a thread name to jump to the thread.

Thread: Dart Kitten
24/06/2012 21:09:14

Canon have you picked your motor set up? 2s sounds a bit low on volts. 2200mah 3s with a 28mm motor of about 1200kv are the norm for models your size.

Thread: Am I being unreasonable?
24/06/2012 08:35:52

Am I being unreasonable in wishing I ever got involved thread which

seems to be going nowhere?

Thread: 12v lipo for engine starter.
23/06/2012 13:58:10

I use a kavan starter 3s is good for a 120fs and as its rated up to 18v, 4s is good for a 35cc petrol.

Thread: Looking ; Scale Insturment Panels Parts
23/06/2012 08:36:00

Also try aerocockpit.com

Thread: Am I being unreasonable?
23/06/2012 08:31:29

I would be apoplectic. If you name the model ordered, model delivered, and vendor you are

more likely to get replies that might help based on experience.

Thread: Cleaning brushless motors
21/06/2012 20:23:24

I have put one or to in the cutlery basket in the dish washer and ran a plate warmup cycle without and suds and all went well.I am sure the ultra sonic would be ok.

Have you a knackered motor you could bury and experiment on?

Thread: Hobbyking run around
21/06/2012 17:24:22
Posted by Olly P on 21/06/2012 09:35:28:

Garbo - they always have on my orders, but I've always used the HK post office. I've had loads of stuff shipped from Hong Kong through the years, but most of that was with work stuff on sea freight.

Olly

Thanks Olly It was Terence I was worried about.

I rember my first order from Hobbycity took ages and I was convinced I had been had

20/06/2012 17:54:30

Do they provide a package tracking number?

Thread: Quarter scale Pup
17/06/2012 21:20:21

I am hoping to put an ASP400 in mine (just about fits in cowl)

Thread: OS 61 fs
16/06/2012 15:46:51

I have a MkII OS61 (the one that came with no muffler) and its certainly not suitable for that plane. I would be really surprised if the ASP70 matched a FSR. I would go for a ASP80 to avoid dissapointment

Thread: COG measurement
16/06/2012 11:21:34

For mid size models I tape two cocktail sticks at the suggest COG and this gives a better "feel" when using my fingers

Thread: Spares for Piper Cub
15/06/2012 21:32:37

try here

**LINK**

15/06/2012 21:27:02

Is that a J3 or Super Cub cowl you need

Latest Forum Posts
Support Our Partners
Sussex Model Centre
CML
Slec
electricwingman 2017
Sarik
Advertise With Us
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!