Here is a list of all the postings john melia 1 has made in our forums. Click on a thread name to jump to the thread.
|Thread: current draw|
so servos working under load , will not effect the current draw of the rx ? what would happen if two or three servos were working very hard , or one stalls , would the high current not damage the bus in the rx . Is that a different scenario to what the rx actually draws current wise ?
how do i check the current draw of an ar8000 spektrum rx , i am using five hitec 5685 hv servos , with a powerbox-systems sensor switch delivering 7.4v to the rx
anytime dave just let me know
much easier with a vinyl cutter
dave i have a vinyl cutter , i do all my own decals , for myself and my mates , let me know what you want and i'll do them for the price of the postage
|Thread: jr r1222 powersafe rx|
tx is a dx7s
are thes rx's compatible with a spektrum tx
|Thread: Second Hand Piper Cub Dilemma|
i know the 96 inch cub i had , was flown with the struts , it was a two piece wing with a wingtube
|Thread: past rc events at ?? hall|
yes ian i think it is , its about 2hrs away from me in cumbria , the name seems to ring a bell
does anyone know when the flying events stopped at holker hall
wow many thanks guys , i remember going there a Long time ago , and i've tried to remember the name of the country hall for years !!!
no it wasnt any of those , it was something hall , did holker hall hold any rc events in the past
i remember years ago going to some country hall in the northeast area and watching a big rc model event
would anyone know what the hall was called ....
not worth the hassle for what you would gain , if it were 100cc of so then maybe
cant see the point to be honest with such a small engine
|Thread: bit of a dilemma|
yes david thats on the to do list as well
i'm going to let the carb into the space behind the firewall , and cut down the standoffs , easiest way forward i think
its an extra 330L
dont think so jez without a lot of de-construction , the wingtube sleeve goes through there as well
dont know why the pics orientated like that
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!