By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Joe Anderson

Here is a list of all the postings Joe Anderson has made in our forums. Click on a thread name to jump to the thread.

Thread: The Whipitteer
13/01/2020 10:22:13

Great work Richyes
Yes send me the pdf and the bust I go out in April.
Will pm you with my new address
Joe

07/01/2020 18:10:05

Rich dont have a scanner.

I can get Bond scanned in April at the Hotel.

Can you send me the profile of Bond.

I will see if I can get someone to help make a computer model from that.

Joe

06/01/2020 17:01:38

img_6778.jpgimg_6777.jpgimg_6776.jpgRich can you get your pilot scanned into a computer and it can be 3D printed.
Here is a sample of a snoopy in flex filament its very light
Joe

Thread: The Hobbit autogyro
24/10/2016 13:10:52

Jesus some Hobbit info here

**LINK**

Thread: Autogyro Blades from AJ Blades
29/10/2015 10:05:57

John best wishes for a speedy recovery

Joe

Thread: The Atom Special
25/03/2015 18:27:02

Its not my conversionfrown

The work of Nigel I wanted to find out if he had any success cool

Come on Nigel let us know how you got onthumbs uporthumbs down

Joe

25/03/2015 16:50:13

Nigel any more info/progress

Joe

Posted by nigel simkin on 13/12/2014 19:27:27:

Here's what I've come up with, its the Pre-rotation unit for the Auto G2.

imag0627.jpg

Thread: All our yesterdays - our old pics
23/01/2015 19:21:07

Remember the Windbag,I first seen it at Sandown

I flew this one for a friend

windbag22 004.jpg

A free plan the Bede BD5

Irvine 40 with robart pump

scan.jpg

 

Edited By Joe Anderson on 23/01/2015 19:27:01

Thread: Completed Atom photo gallery
16/01/2015 13:30:40

My one in Corfu, now in Scotland for some TLC

Joefinish01 (2).jpg

Ready to pack for its trip to Gyro Hospital Scotland

end001 (2).jpg

My friend Iains Atom from Edinburgh

sany0003.jpg

Joe

Edited By Joe Anderson on 16/01/2015 13:38:05

Thread: Help! it won't auto rotate.
15/01/2015 02:52:14

As David says the rods look a little thin and flexible

On on of my models I moved the main undercarriage forward and this allowed the model to take off without too much elevator

Your mains look a bit too far back,can you try and move them forward?

Its best to video any test flights it makes it easier to see what the problem might be

I rely on video as I can never remember enough detail after the flight

Joe

14/01/2015 12:07:33

Arthur can you post some pictures of your model and the head

-1.5 pitch may be to much you will get good spin up but low lift

I fly the Mk1 Gyrone it has zero on the blades but needs the prerotator to get the head up to flying speed

Joe

Thread: The Atom Special
03/01/2015 18:30:16

Nice build Martinthumbs up

Joe

03/01/2015 14:22:42

Test flew the new three blade plate and the modified two blade platethumbs up

The Wot 4 had been trimmed for a different head and the takeoff was a wee bit out of trimsurprisesmiley

They both handled well and I did not find any problemsthumbs up

I do like the sound from the two blade setupteeth 2

Joe

02/01/2015 18:17:06

Assembled the two blade version with an extra 2mm layer on the bottom to stop any down flex on heavy landingswinkwink
And added a circle to equalize the distance from the blade to the hubsmiley
Again I will post once I have had a chance to fly it

Joe

geoffcnc001 (16).jpg

geoffcnc001 (17).jpg

geoffcnc001 (18).jpg

geoffcnc001 (19).jpg

geoffcnc001 (20).jpg

geoffcnc001 (21).jpg

geoffcnc001 (22).jpg

geoffcnc001 (23).jpg

geoffcnc001 (26).jpg

02/01/2015 16:24:08

 

Hi Guys got some parts cut today for the new three blade plate and some parts for the two blade setupsmiley

We made a mistake with three holes blushbut was easily fixed when I came to build up the headwink

I will post info and video when I get a chance to test fly the new plate

Joe

geoffcnc001 (5).jpg

geoffcnc001 (15).jpg

cnc fix01 (1).jpg

Can you spot the mistake?

cnc fix01 (2).jpg

Three new holes

cnc fix01 (3).jpg

cnc fix01 (4).jpg

cnc fix01 (5).jpg

cnc fix01 (6).jpg

cnc fix01 (7).jpg

cnc fix01 (8).jpg

Edited By Joe Anderson on 02/01/2015 16:27:57

01/01/2015 20:49:05

Looking good Billsmiley

 
 
 
 

Edited By Joe Anderson on 01/01/2015 20:51:06

29/12/2014 17:37:02

Garry PM sent

Joe

29/12/2014 16:13:05

Hi guys can you send me any PDF files, or files from the program you are using to draw the new plates and I will get my mate to cut me some test pieces and have a go with them

These are the parts I make to keep the standard head serviced after some abusesmiley

Joesany2222.jpg

sany0003.jpg

cnccut002 (2).jpg

cnccut002 (5).jpg

26/12/2014 22:10:16

Looking good Steve, a good maiden well donethumbs upsmiley

Enjoy the three blades for a while then try the twosmiley

Joe

24/12/2014 14:41:18

Steve awfa braeyes

Every thing Rich said and watch for the left roll on takeoff the blades look like they are not up to speed but they aresmiley

Joe

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Cambridge Gliding Club
Wings & Wheels 2019
CADMA
Slec
electricwingman 2017
CML
Sussex Model Centre
Sarik
Advertise With Us
Latest "For Sale" Ads
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us