By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for john stones 1

Here is a list of all the postings john stones 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: PITTS SPECIAL S-2A
29/12/2013 21:00:25

love the Honda colour scheme john wink

it needs a S.U.26 in same colours sat alongside smiley

Thread: Vintage Propellers
29/12/2013 18:11:57

M.K. used to be best prop on market, as long as they have been stored out of frost and sunlight they should be ok

I still have a few which are as good as new. A.P.C. props are good and graupner still do a good prop both nice and stiff.

Thread: Sukhoi su-26
23/12/2013 23:55:36

hello Jamie

looking good, just a question if I may, what exhaust will you be using, some of the stock ones are very noisy and headers and cans are used to bring the noise down. this could mean altering the fuzz to fit them. its just a thought not a criticism

Thread: Shed nearly flooded
23/12/2013 21:46:24

reclaimed railways sleepers do a good job as a shed base

quite cheap also, come ready treated, widely available

Thread: Precedent Hi Boy series 2 trainer
23/12/2013 15:55:37

hello ian

hi boy will be fine with standards, no need to save the little weight smaller servo's would give you.

mount them sideways in wing, and line cutouts with balsa, or in centre if space allows. its not dull at all, that depends on c.g. amount of movement and powerplant, most of all on pilots ability. as its blowy where you fly I would think about putting a f/glass bandage on wing centre. two piece wings don't work once airborne wink

Thread: Which hot glue gun do you use and which do you recommend?
22/12/2013 19:54:19

I've got a hammer drill, had it 30 years smiley

its still good for knocking nails in laugh

Thread: Peanut Butter
22/12/2013 19:36:51
Posted by Jez Saunders on 22/12/2013 17:49:11:

Think they might be using the peanut butter trick with our politicians too !

I think they spread it somewhere else on M.P's though wink

Thread: Which hot glue gun do you use and which do you recommend?
22/12/2013 19:20:31

usually quality stuff bosch chuck

Thread: Do DA engines come pre run in
22/12/2013 19:18:01

test run

not run in

Thread: Transmitter neck straps ...
21/12/2013 19:35:45

clip on at flight line

hold till model off, engine dead.

Thread: os four stroke
21/12/2013 19:28:27

always used O.S motors, superb

only followed what advice they gave, and never had a problem

Thread: Transmitter neck straps ...
21/12/2013 18:28:43

me too, just feels right

tuck it down my shirt before starting up and have somebody carry model out.

Thread: It's the grand pre-Xmas (better stuff than normal) giveaway!
20/12/2013 11:35:08

me too please

Thread: Pitts Model 14
20/12/2013 11:29:14

look like they pivot to me martin, agree with your thinking.

if car and storage allow it i'd go for 1 piece wing

rigging and derigging at field is one of the downsides to bipes

looks great I wish you well with it , like colour scheme also

Thread: SAFE OR not so Safe? Using electronic stability aids
20/12/2013 08:24:34

I must have fell asleep.surprise forums, clubs, model shops, etc .have always promoted flying safe and in an appropriate area. clubs encourage new members, most allow free visits and offer free tuition. thousands of people have taught 11, 12 year olds myself included. the hobby is full of people who are only to happy to help others. I strongly suggest your preaching to the wrong audience

Thread: Returning to RC modelling after a break
20/12/2013 08:05:26

hello neal

love building myself

don't rule artf out yet though, there's some great stuff about

Thread: Hello to all on the RCME forum
19/12/2013 21:17:54

hello Geoff

pitts eh, you'll love ityes

Thread: New FPV rules effective March 2014
19/12/2013 19:59:37
Posted by ken anderson. on 19/12/2013 16:49:05:

this thread has been up and down? ....... in our club of 112 members we have one who is interested/going to try FPV .......we are in controlled airspace and as such have to go with the ANO order etc......it would be interesting for to find out(if possible) how many forum members are interested and intend having a go with the FPV's......we had a visit from a non member who had purchased some equipment...and when we pointed out to him the ANO/BMFA STUFF he said he wasn't really interested in rules and reg's and left.......so I wonder how many people-young and old will be getting some form of FPV for Christmas and wont have the slightest idea about any ANO's/BMFA'S or CAA's.......when it go's pear shaped it will be the rule abiding flyer's who will be tarnished with the brush.....

ken Anderson....ne....1.......my opinion dept...not intended to upset any readers........

PS......i'll be amazed if someone can see an 18"dia FPV machine 1000ft from the ground.......

ken

all clubs have had people turn up with bad attitudes, its a personality thing not specific to fpv

size of model limits the height we all fly at, not a given number. (other than controlled airspace + ANO's)

somebody could go buy a jet, heli, spitfire etc and tarnish rest of us.

also there are people at clubs up and down the country showing fpv can be safe

the words can be safe , applies to us all

Thread: Flying Tardis? perhaps not....
19/12/2013 18:19:08

its a big mobile phone phone

wondered why he had to keep regenerating yes

Thread: Where do you store your models?
18/12/2013 21:46:19
Posted by Stephen Grigg on 18/12/2013 20:10:20:

NOT in my truck anymore all over the house and in 2 sheds

good post Stephen wink

don't let em get you down

Support Our Partners
Slec
Sussex Model Centre
electricwingman 2017
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!