By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Harrier Mate

Here is a list of all the postings Harrier Mate has made in our forums. Click on a thread name to jump to the thread.

Thread: Bespoke water slide decals
14/12/2019 20:19:26

Thanks Guys..... there is clearly a wealth of information and techniques available. Thank you for sharing.... I will certainly explore the whole lozenge camouflage pattern as a pair on decal after seeing the cost of commercially available lozenge fabric. 🤣

mans with a small test piece first I can just experiment.... here goes!
Thanks again to all the tips...

12/12/2019 21:41:42

Worth buying a laser printer just to achieve that result!

12/12/2019 21:40:46

Monz,

amazing scheme. And so much cheaper than Arizona Models fabric (about £150 for just the wings). Could you tell me more about that technique. You have clearly covered the model in a base layer first.... plain tissue or fabric? And then applied the printed lozenge to tissue???

12/12/2019 18:38:04

Oops.... I didn’t post the explanation. The dragon on the side of the Picture above is what I’m looking to replicate.

12/12/2019 18:15:25

753bb631-f2cc-4b2b-acfb-4d579f323c95.jpeg

12/12/2019 14:20:14

Hi guys,

Does anyone have any experience of making bespoke water slide decals using special inkjet paper.... looking to make some fairly complex motifs for my Flair Fokker DVII.

Thread: Flair Fokker DVII
12/12/2019 14:15:10

Does anyone have any experience of making bespoke water slide decals with special inkjet printer paper?????

06/12/2019 21:30:40

Yep. Saw that photo before.... really brilliant scale effect. Just the addition of the green tape as the belt for the ammo makes a massive difference.

Thread: Graupner
06/12/2019 18:41:07

That’s a shame! I have their F4U Corsair (complete kit with retracts) sat waiting to be built or sold on... I already have 2 Corsairs but this was my first purchase..... Beautiful Fibre glass fuselage and wing centre section.

Thread: Flair Fokker DVII
06/12/2019 00:03:19

I decided to use 0.8 mm ply as the centre of the sandwich for the wing strut attachment points! Only problem was that I had already started attaching the serrated leading edge sheeting to one side. So inserting the 0.8 mm ply spacer was akin to keyhole surgery!!! At least I had the rib outlines still so was able to replicate exact size and eventually patience won!ac4daa60-30da-4eba-b12c-89e7e8016d65.jpeg

Edited By Harrier Mate on 06/12/2019 00:04:41

05/12/2019 23:58:09

The sum total of my work this eve....0afbadf4-a9e1-4463-a110-5f74a92936fa.jpeg

03/12/2019 19:56:36

Drooling at some of the scale accessories like ammo boxes etc on the Arizona site.... nahhh! I can scratch build them.... is litho plate the very thin aluminium stuff that can be used??

 

Edited By Harrier Mate on 03/12/2019 19:57:49

03/12/2019 19:48:34

First job is to finish the serrated wing leading edge sheeting... just top of too wing to do.... must remember to glue in the strut attachments first!.... then back to finesse the dummy sprung tail skid assembly. It’s not going to be steerable but don’t think that will matter for amount of ground roll with skid on the ground.

03/12/2019 19:37:04

Spent this eve scratching my head.... first looking for small assemblies I know I had already completed and trying to remember solutions to little problems I had devised but now forgotten... and not written down anywhere.... and where did I put that aliphatic resin glue.....🤣

02/12/2019 20:30:49

Ive emailed 'Todd" at Arizona this afternoon.... to find out how much it will cost and will then place order... using the excuse that its an early Christmas pressie for me! Ha Ha.

02/12/2019 13:04:01

Tom Tom,

if the Arizona Models route doesn’t work, I’d really appreciate the pattern stencil to copy.

02/12/2019 13:02:31

Hi guys,

David thanks for the link.... I was waiting for Arizona models to get back to me... but you’ve already answered the question 😎

02/12/2019 09:13:01

Hi Bob,

just researching the lozenge pattern covering at moment... seems that Arizona Models May be the only source!

01/12/2019 23:46:13

Hi guys,

been a long time sat waiting for a home and somewhere to build... but finally I’m ready to continue with my Flair Fokker.... if anyone is still out there that’s interested!

07/02/2016 22:07:24

Jeff.... Disregard!!! Just my ham fisted clicking. Found them all now.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
CADMA
CML
Cambridge Gliding Club
Slec
electricwingman 2017
Sussex Model Centre
Wings & Wheels 2019
Advertise With Us
Sarik
Latest "For Sale" Ads
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us