By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Andrew Dunn 1

Here is a list of all the postings Andrew Dunn 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Aspen fuel
06/07/2020 18:26:48

We're a stockist and it goes out the door at £19.95 for a five litre can , its also a higher octane that standard pump fuel and is so much better for you and the environment.

Thread: Carb Problems
15/04/2020 17:10:33

Instead of using a petrol oil mix have you ever thought about using one of the pre-mixed alkylitic fuels ? Husqvarna do their own another is called Aspen2 . they contain NO ethanol to rot out fuel lines or any other rubber bits or any of the other harmful chemicals that get added to fuel,and its evironmentally friendly . I've even found in small two stroke engines it'll de-gunk a carb the other added bonus is ..... it has a higher octane rating too

Edited By Andrew Dunn 1 on 15/04/2020 17:11:13

Thread: Car indicators
05/07/2019 09:32:59

bmw.jpg

Thread: 1/4 turn wing fixings
23/09/2018 09:14:57

not sure if these might be too heavy or not ...... https://www.carbuildersolutions.com/uk/dzus-fasteners-2

Thread: Very low mileage older car - should I be suspicious?
15/06/2017 19:06:29

an MOT history check can be done here .... https://www.gov.uk/check-mot-history will list mileages and failures/advisories

Thread: Chris's Bella Ballerina HD
28/12/2016 11:28:04

Vince if i remember correctly acetone (nail varnish remover) will dissolve gap fill foam

and

hello chris have been reading this build from day one and as a non-builder/flyer i find it very interesting to the point i'm actually starting to think about maybe giving this building lark a try myself

Thread: R.I.P. Rick Parfitt
24/12/2016 15:38:17

just seen this on the news ...... another one bites the dust
Thoughts go out to his family and friends on this sad day

Thread: Aircraft identification....
26/11/2016 19:16:57

yuri_2.jpgWhilst browsing through one of the mant forums i frequent i came across a couple of photo's of Yuri Gagarin , can any of you well educated and well informed forum members help in identifying what the aircraft is .... many thanks.

yuri 1.jpg

Thread: Metal supliers
06/06/2016 19:46:54

is this the kind of thing you're looking for ?

http://www.carbuildersolutions.com/uk/aluminium-tube

Thread: can you identify this please
21/04/2016 21:09:50

Thank you for the information I knew somebody here would know

19/04/2016 23:50:00

I was browsing another forum earlier when i stumbled across this can anyone please tell me what it is ? the tail to me says antonov ......unknown

Thread: What's flying over your house
03/03/2016 13:01:09

At about 11:30 i saw a pair of V-22 Osprey's heading east on a flight path between Yeovil and Salisbury Plain smileV

Thread: Nostalgia aint what it used to be........
04/02/2016 23:42:39

the little white dot when you turned the tv off

Thread: Choosing the 10 best Helicopters of all time.
03/01/2016 10:19:10
Posted by cymaz on 03/01/2016 09:27:04:

Bell UH-1?...oh I love the smell of ...etc....etc..

Although when I were a lad...this was my ideal

Edited By cymaz on 03/01/2016 09:35:01

Love the look of the spectrum i remember it as a kid , any auto gyro builders/pilots out there want to build one ?

Thread: Ebay sellers...
20/12/2015 21:46:11
Posted by Wiltshire Flyer on 20/12/2015 19:08:26:

Another one, strong winds??!!! 😂 **LINK**

and you can buy it brand new in Toys'R'Us for the grand sum of £32.99 hmmmm now let me see ....................

Thread: When does a cheat hole become a duct?
30/11/2015 12:41:20

I'm neither a modeller or a flyer i just have an interest in all things that fly , always have always will . Now this may sound daft/stupid and please tell me if this is the case but .... is there anyway/possibility you could leave the ends of the wings open and have inlets built into/through the wings ? i know i said it was daft but hey you never know , the other thought i had was could you have inlets disguised with a fine mesh so it looked solid from a distance but would allow air in ?

Andy (member of the daft society)

Thread: CNC cut ply motor mount needed
23/11/2015 09:31:57

or if you need to cut lots of discs/holes of varying sizes try something like this ..... http://www.toolstation.com/shop/p44999

Thread: car stereo's
21/11/2015 12:15:21

Hi Phil

what year is your zafira ? if its pre 2007 its not looking good for a direct aux input

if its post 2008 have you looked down by the handbrake as some had an aux input socket fitted there

also is it a CD30 or a CD30mp3 ? i had vauxhalls for years and trying to find an after market head unit and keep the dash display and steering wheel controls is a nightmare you could also try .....

www.vauxhallownersnetwork.co.uk

www.astraownersnetwork.co.uk as after all the zafira is based on the astra

www.vxronline.co.uk

hope you get it sorted

re: the fm link i assume you've tried it all over the car to try and get the best signal with least interference ? I currently use one in my landrover was only a couple of quid off amazon and the quality varies greatly depending on where i put it also try to find an fm frequency that isn't used by a radio station.

Andy

Thread: You have to see this !
04/07/2014 20:08:54

Did anyone notice how it still sounds like a VW ?

Thread: What's flying over your house
29/06/2014 15:30:59

saw a B-17 flying fortress at around 2-45pm today flying east near Shaftesbury , Dorset , heard a long while before i saw it smile

Latest Forum Posts
Support Our Partners
Slec
electricwingman 2017
Sussex Model Centre
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!