Here is a list of all the postings Alan Thorpe has made in our forums. Click on a thread name to jump to the thread.
|Thread: Sanding a leading edge|
I had the same problem trying to sand a nice leading edge on a 2m glider.
Best tool i found was a curved sander from permagrit. ...fantastic to use and gives a uniform curve to leading edge.
I'll post a photo and try find a link to it in a sec.
It has different radii curves built in depending on where you hold and sand with it and never loses its cutting ability.
|Thread: Wing Spar Foam Wing|
|Great stuff lads thanks very much for the help!! Will let you know how it goes!|
Just wondering what's the best way to reinforce a foam wing with a spar?
I was thinking of using carbon rod and tube, but it seems a bit dodgy cutting it and shatter problems, plus the dust and shards.....putting me off that idea..
Thinking of just using a 5mm dowel connecting both wing roots together, going through fuselage. Model is Freewing Hellcat.
Sure let us know if there's a better approach!
Think the brass tube and bar would be too heavy, hoping the dowel would be better option.
|Thread: Summer is here!!....Who's been flying??|
Fantastic stuff Steve!!
|Sorry quote function didn't work...|
meant to quote Stephen Jones maiden!!
|Fantastic stuff!! How did it fly??? Looks great!!|
|Thread: which model warbird?|
Just hoping someone might help me with choosing between 2 electric warbirds I have been mulling over!
I like the look of both and reviews are good!
One is TopRC hurricane, and 800mm wingspan and the other is Hellcat F3F 980mm by FreeWing.
I've flown my 800mm Tempest as 1st warbird and a 600mm p51. Always wanted another warbird!!
Thanks in advance!!
|Thread: 3ch slow fly trainer|
|Micronradiocontrol has some great Park flyers 3 channel that are very quick and easy to build and fly very nicely! I build the diddle rod from Stevens aero kits .....It flew really great and slow very enjoyable!|
|Thread: Red Eagle 2016 Build|
|Good luck with the build! This is a great flyer, I really enjoy flying it, it can handle some event wind also and is very stable for camera recordings!! Let us know how your build goes and enjoy!|
Just wondering if the copier you used has normal powdery toner as in a laser jet printer or could it be the coloured wax instead of toner, as it may not separate off the page as easily?
Only a pure guess too, as I haven't tried this method yet, butmaybe try increasing the contrast so that more toner is used,making it thicker and easier to transfer?
Just 2 guesses, hope you get it to work for you!
|Thread: PA--12 Super Cruiser|
|Well done with a fantastic model, superb detail and looks great before covering and after! Looks great in the air!|
|Thread: Park Flier|
The only mod I made was to use some ply over the firewall to mount the motor, and recently the motor packed up, one of the poles failed, so I lengthened the motor wires to run them to a more accessible area as they were originally enclosed in the nose. Sure let us know what model you go for in the end.......there is a lot of choice!!
|Micronradiocontrol stock them and give a great service for the kit and electrics.|
I'll post a pic and link in a sec!
Great stuff, I built a reallygood park flyer from parkscalemodels. A p51 and am building a corsair now. They fly fantastic and go together easily and quickly! Perfect for a nice calm day and cheap to equip with 18mm motor 6 A esc and 3 4g servos. I really enjoy flying mine.
|Thread: Red Eagle 2016 Build|
Just contemplating going slope soaring at some stage this summer,it will be my first time, up until now i've been flat field soaring with the RedEagle and another glider, Thush motor glider.
I'd like some advice please, on taking these gliders to the slope for the 1st time. I've flown both gliders in some wind, just a little over 10 knots lately and all was good, at our flying site with good space.
Hoping it should be good craic with a few other gliders in the air at the same time!!
Sure let us know what you think!
|Thread: Spring has sprung , who's been flying?|
|Wind died down this evening and managed to get a half hour flying/gliding done with the Thrush glider, lovely still air and sun lighting up the glider....cold out though! Just over half an hour out of a 1000mAh battery happy days. |
Grand to get out, as had written off the week with high winds!
|Thread: E-Glider new design called RedEagle|
|That is a great job you've completed there! |
I really enjoy flying this glider it's a great flyer.
I managed to damage mine on landing but had it fixed and back in the air in no time. ....good to have built it and know how it goes together!
Ah itching to fly it again now looking at these pictures!!
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!