Here is a list of all the postings Eagle 899 has made in our forums. Click on a thread name to jump to the thread.
|Thread: Phoenix 2000|
Three on each aileron and flap.
I used small Kavan hinges and Blenderm tape to seal the gaps
Edited By Eagle 899 on 03/10/2017 13:45:12
|Thread: G-RX8 reciver|
I'm using an X8R in my P2000 and was going to add a vario.............but now I'll wait.
You'll love the glider, I've added the flap servos and programmed in crow and camber
I've been looking at using one of these too; lots of info on this forum:-
I'm waiting until all of the mentioned issues are resolved!
Edited By Eagle 899 on 30/09/2017 13:05:17
|Thread: Home made adjustable CofG frame/cradle thingy|
I use the HK one which works the same as Stevo's but cost less than a tenner
Edited By Eagle 899 on 18/09/2017 14:19:00
Edited By Eagle 899 on 18/09/2017 14:24:07
|Thread: S6R config app issue|
I know that I said I wouldn't waste any more time on this issue but....................
It's too windy (for me) to go flying and the test match finished early so I was bored.
I was still intrigued as to why this app wasn't appearing properly on my PC and my laptop so, using Teamviewer, I compared my screen to my son's to see if there was an obvious difference.
For many years I've preferred to have the Taskbar on the top of the screen not on the bottom which is conventional.
Lo and behold, with the Taskbar on the bottom, the app appears properly with the Previous/Calibration/Next buttons!
|Thread: October 2017 issue|
Mine just landed
|Thread: S6R config app issue|
App has been run on my son's W10 PC and works perfectly!
It remains a mystery, but I'll not waste any more time on it
Thanks for all the input
Edited By Eagle 899 on 31/08/2017 11:21:25
Thanks to David for emailing the config ZIP.....................exactly the same result, so I'm now sure that it's my PC that's causing this enigma.
I will try it on one of my sons' PCs asap and confirm.
Looks like my PC/Win10 then!
I'll PM you my email address, would you send me the ZIP of the config app you used please and that should confirm it.
Ian, Tried S8R config...same result.
Denis, S6R brand new, first one I've tried and using V 1.3
Mike, You're a star..........again; downloaded SportSet and latest .exe, works a treat thank you
I agree about the image being short but it was in the middle of a 1920 x 1080 screen res exactly as shown.
PS I tried several other resolutions too.
Edited By Eagle 899 on 25/08/2017 17:38:23
Has anyone got a ZIP of the config app that they have successfully used they can email to me, so that I can rule out my PC being the problem?
Please PM me for my email address if you can help. Ta, Shep
Just to reiterate, I've attached actual images of the first page showing the correct version (Aux tick boxes) and the offending Cal page!
PS Thanks for the replies so far
Edited By Eagle 899 on 25/08/2017 11:32:55
Edited By Eagle 899 on 25/08/2017 11:33:25
I've just bought an S6R Rx and downloaded and installed the Config App on my Windows 10 PC.
It opens up and finds the Rx, the accelerometer numbers are showing and changing to prove the connection but on that Calibration page the three buttons: Previous, Calibration and Next shown on the downloaded image below are missing!
Anyone got a fix for this please?
HI Keith pm sent. Shep
I've got a 4 channel Futaba 35 Mhz Tx & Rx which I bought and used circa 1986 with an Algebra glider, which I also still have!
You're welcome to the Tx/Rx for gratis plus postage if you wish.
Mode 1 and good working order
Edited By Eagle 899 on 07/08/2017 20:08:56
|Thread: Taranis x9d plus Transmitter|
Intrigued am I ......
|Thread: ESC BEC SBEC UBEC wetBEC ??|
|Thread: Foster Wickner Wicko/Warferry|
Absolutely! From another ex full size Auster pilot
|Thread: 65% pitts challenger has flown|
Great Robbie, I look forward to seeing it at the shows
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!