By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Max Z

Here is a list of all the postings Max Z has made in our forums. Click on a thread name to jump to the thread.

Thread: Gardan GY 20 MINICAB
20/08/2017 14:52:41

A French plan HERE. I am ashamed to say I have one under construction for the last 5 years.....embarrassed

At some time the designer Laurent Buissyne also sold a CD with an illustrated set of building instructions.

Max.

Thread: Wireless Copilot - mAh telemetry
19/08/2017 09:12:44

Have a look at the Unisens-E multiple telemetry sensor, including battery capacity used. Suitable for a number of current Tx/Rx systems.

(information in German, iirc there is also an English version, but I cannot find it right now)

Edit: English manual HERE.

Edited By Max Z on 19/08/2017 09:17:21

Thread: lights! No camera! Inaction!!
15/08/2017 12:24:06

All about LEDs in series/parallel in the September issue of RCM&E.

Thread: i/c wiring diagram
10/08/2017 16:18:03

Can be seen HERE on the Dutch forum.

Thread: Forum members' new models: Let's see them.
25/07/2017 20:16:21

p1020563.jpgp1020560.jpg
This is my "Jimmy". I designed this plane myself with the objective of an easily built, balsa and plywood model, suitable for the beginning kit builder and also as an ab initio trainer,. The idea was to get a group of youngsters interested for a building class at our club premises, but due to various circumstances nothing came of that idea. I am flying it regularly because it is fun to fly and simple to transport. The plane is 1000 mm span, weighs 465 gram and carries a 100W 1100kv motor and a 1000 mAh battery.

I passed the drawing and the building instructions on to Rob at www.RBCkits.com , who has now kitted it and is selling the kit online.

Max.

 

Edited By Max Z on 25/07/2017 20:17:37

Thread: Traplet
23/07/2017 08:54:14

 

Posted by kc on 23/07/2017 08:19:12:

RBC don't seem to list the Red Eagle now

RBCkits Red Eagle

Parts kit (no drawing) I would suggest to mail them and ask for the extra cost of adding the drawing.

Max.

Edited By Max Z on 23/07/2017 09:06:00

Thread: HK KK-1.x Flight Controller manual?
11/07/2017 20:16:00

Thanks Bob! I have sent you a PM. I must confess that the urge to experiment has faded somewhat, but I am still interested in the manual.

Max.

Thread: Hiperlight
08/07/2017 09:30:22

On request, I am posting the front and side views that my design was based on:

hiperside.jpg

hyperfront.jpg

Thread: Unisens-E Graupner telemetry sensor
06/07/2017 18:17:34

 

I made up my MPX receiver update cable like so:

mpxprog.jpg

mpxprog2.jpg

When the MPX cable works with the Unisense, this should work too I guess.

Max.

Edited By Max Z on 06/07/2017 18:21:07

Thread: Which CAD software
22/06/2017 19:03:52
Posted by John Stainforth on 22/06/2017 15:28:32: Rhino - fairly expensive, but the license is for life, including all upgrades.

True, but you will have to pay extra for new versions, i.e. the upcoming 6.xx for Mac. I plan on staying with 5.xx (still being upgraded regularly at present), since it fulfills all my needs.

To further make the case for Rhino: there is an excellent forum where you will find plenty of help and guidance by both experienced users and the people behind McNeel. A bunch of friendly guys who will help you out when you get stuck. And you will learn from the answers to other's questions, I know I still do.

But as others have said, you will have to be prepared to put some effort and time in learning to use any package, and I would even say you will have to treat it as a separate hobby altogether, and not only as a means to facilitate your modeling.

Max.

Edited By Max Z on 22/06/2017 19:05:17

22/06/2017 14:01:03

I am a fan of McNeel's Rhinoceros. It is certainly not for free, but you can download a full version on trial for 90 days. After that you have to pay for a license since it stops saving your designs. The Mac version is slightly less developed than the PC version (and therefore cheaper), but is still way more capable than the average modeler needs. We are talking hundreds of euros/pounds though (unlimited license duration).

Max.

Thread: Lidl XL Glider
21/06/2017 09:50:20
Posted by Devcon1 on 20/06/2017 23:00:05:

12 ! What on earth have you planned for them, a joined up 12 ship formation possibly 😂

I thought I'd gone over the handlebars with two....

He is on the Dutch forum, claiming it's for a family gathering. He had to travel to 6 or 7 Lidl stores to get them.....

I made him aware of this forum thread, let's see what comes out of it.

Edited By Max Z on 21/06/2017 09:52:04

Thread: Verhees Delta
06/06/2017 15:09:09

No, I did not. I am happy with the way it flies on a 1.5 mAh battery and 60 g extra ballast directly behind the motor.

Edited By Max Z on 06/06/2017 15:10:26

06/06/2017 14:42:43

The V-Deltas are coming! Keep an eye out for the August issue of RCM&E.

chasing.jpg

And before anyone asks; this picture is 'shopped. They are actual flying shots of Rob's and mine, but we never got them that close in front of the camera, let alone both in focus........

Max.

Edited By Max Z on 06/06/2017 14:54:23

Thread: Cura 2.5.0
31/05/2017 11:11:14

Are you sure you are downloading .stl files from Thingyverse? Judging by the "Convert Image"-interface Cura is in some form of Photo-etching mode, probably because you have loaded a .jpg or .tiff file.

Edit: I checked by loading a .jpg file with Cura and I am getting similar results, so that must be it.

Edited By Max Z on 31/05/2017 11:13:46

Thread: I think i have found my next build project
14/04/2017 08:36:38

Love it!

I guess I could update my flea project (a HM16) to that.

pouhm16_artisticx3.jpg

Thread: Verhees Delta
08/04/2017 18:00:55

Bart Verhees treated us on an unannounced flyby of our model flying field, very impressive! The shape is unmistakeable, and I was alerted by my fellow club members who started to shout: "hey, that is that thing that Max designed a model of!" teeth 2

Max.

Thread: FrSky Taranis - user chat
06/04/2017 13:28:06

Ah. I will dig up my copy of that and have a read. Thanks Andy.

Max.

05/04/2017 19:36:07

Hi Andy,

I may have missed that, but I am not sure if we are talking about the same document. In the "Open TX Getting Started" document it reads on page 3: "

In your user area on your computer create a folder called Taranis. Then connect the Taranis to your computer with the bootloader enabled. – See How to connect your transmi er to a computerin part 3, How to”. Once connected 2 new folders can be seen. One will contain just 2 les, EEPROM and FIRMWARE. Do not touch these! However, copy the other folder, with all its subfolders to your newly created Taranis folder on your computer, and rename this folder SD Card. We are now ready to start thinking about the OpenTX approach and begin to see how it works. "

I do not see a page 100 or 101 in any of the Martin Phillips documents?

Max.

05/04/2017 17:17:36

Yes! Thanks Bob! thumbs up

Max.

Latest Forum Posts
Support Our Partners
CML
Sussex Model Centre
electricwingman 2017
Slec
Advertise With Us
Sarik
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!