By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for john featherstone 1

Here is a list of all the postings john featherstone 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Commons Science and Technology Committee Enquiry on Drones
12/07/2019 18:29:20

for Cuban 8 above?? the person who really should be giving it to them large is the PATRON OF THE B.M.F.A. he should be called upon to take our side in this mess if not why bother having him we may as well have chubby brown at least we could have a laugh also I think this may have stated with the phrase unmaned aircraft we should have stood our ground and said MODEL AIRCRAFT unmaned aircraft lumps all things that fly without a human together not good its all a play on words

Thread: Identification Please of this Oldie
13/02/2017 15:05:45

I can tell that engine is an MP JET NICE MOTOR ?????????

Thread: Planning laws, clarification sought
10/02/2017 16:33:51

its easy mate?? I live in Cheshire money is there GOD end of story, no matter what you do MONEY WINS they bend the law to suit themselves you will never win???? UNLESS YOU HAVE MORE MONEY THAN THEM

Thread: Diesel Crackdown
29/01/2017 18:52:03

seeing as were on the subject of cars iv'e just had a letter on the 23/1/2017 stating that on the 6/12/2016 my car was illegally parked in a disabled bay without a blue badge this is the first iv'e heard of this?? its a fine for £124.00 iv'e asked for proof of this and they have told me they will not supply with this is this a SCAM and what can I do about it ?????????? iv'e heard people tell me these xxsxstards put the ticket on you windscreen photograph it then take it of and bin it and you know nothing of it till months later when the balliff turn up

Thread: How much does your club membership cost on top of your adult 33 pounds BMFA membership?
09/01/2017 12:56:16

our club £110 per year +BMFA grass strip mown weekly in summer 24/7 access container for two sit on lawn mowers of which we have three, toilets, and clubroom all mod cons?? approx. 19 member but we will go to 25, no nonsense club we put the world to rights every week(make of that what you will) two BMFA examiners regular food?? couldn't wish for a better club??we are in Cheshire ?? fly large models and electric + petrol and old timer type models and sometimes control line, sorry NO HELECOPTERS you come and fly three or four times for free then you are asked if you would like to join or you are asked to leave this has worked well for us since 1990

Thread: T Shirts
12/12/2016 20:33:10

should send martin bedding one seeing he was in your club??????

Thread: Testing clone of the TowerPro MG996R Servo
27/10/2016 11:33:14

I use those servos quite a lot I think they may be made by different companys if you notice some are TOWER PRO some are TOWARD PRO note the different spelling I have a lot of these servos all have two ball races in them I did buy 4 from some were in Birmingham that were advertised as having two ball races having opening them they were found to have plastic bushes just like you say so I sent them back I also notice that the servo you've pulled to pieces says PROSTER on it there are that many clones out there so your servo could be a clone of a real tower pro servo or a clone of a clone???????

Thread: Dave Smith Models
10/10/2016 15:19:41

I have a d s m contact 140 it has a rossi 40 in it and the mini pipe it came with, really I should put a tuned pipe on it but it flys okish needs a dose of trimming just getting round to it, I also have a joker with a webra speed 61 re piped motor goes like the xxxx off a shovel its on 35 meg never changed it to 2.4 flys as if on rails lovely

18/06/2016 19:25:56

flown and had a couple of dave smiths models, dalotel and joker really nice flyers still have the joker with a webra speed 61 and pipe retracts goes like s- - - ???

balistic

Thread: Classic Aerobatic Model Photo Thread
16/05/2016 15:29:37

flew the tornado yesterday (sunday15/5/2016 could not believe how well it flew retracts worked fine, asked by a club member after what the trim was like er not touched them I replied?? everything worked as it should well impressed

11/05/2016 17:39:15

took the motor out of the tornado today webra 61 pumped, the pump is an integral part of the back plate it is made by perry?? bit of tube on the inlet and blow through it all clear both ways so I took the back plate off no moving parts there is a black disc in the back plate dosnt seem to move if I try to push it how it works I don't know re assembled it all and come to put the motor back in the model put it in and tried blowing the tank up zilch coming out of the feed undid the motor and noticed the feed pipe kinked took the motor back out and turned the back plate round put the motor back in still kinked give up took the feed straight to the carb ill try that

09/05/2016 20:55:03

I have masses of solarfilm from the 70s and 80s a good friend of mine used to have a model shop and was a friend of I think mr solarfilm hence the large amount of film I have its manly seconds were the colour was a bit off or there was a fault in it and it was skipped and it came out of the skip , I have just covered a glider with some of it from the early eighties film that is I was give some of hobbykings film and found it very good so have stuck to that I find using film quicker than paint ect ect and easy to apply

09/05/2016 13:00:59

the model is mine built from a plan, the pump is built into the backplate just in and out it might be dry as the motor has not been run for a long time or it could be goosed, the fuzz is light ply and balsa with foam wings and tail, its covered in film from hobbyking and most cut with a scalpel the words TORNADO and UKCAA were cut from film on a club members wifes machine? the electric retracts are from hobbyking also, weight about 7-8 pounds quess

Thread: Let's play a game, guess the height of the camera.
18/03/2016 16:19:28

A.300 FT

B. 300 FT

C, 400 FT

D, 2500 FT

Thread: Nahhhh it cant be surely ???
18/03/2016 13:43:29

just as the screwdriver stopped knocking YOU WOKE UP AND EAT YOUR CORNFLAKES EXTRA SLIM ive heard some bull---t in my time extra slim???? too much time sat in that hut with them old men but (that's another storey) ha ha ha see you sunday

17/03/2016 16:06:23

ive got the chubby brown movie if you want to borrow it extra slim????????? in fact got them all

Thread: 2016 Nationals
11/03/2016 16:30:38

SPOT ON ERFOLG CANT STOP LAUGHING LOVED IT MAN AFTER MY OWN HEART HA HA HA

11/03/2016 16:20:34

I agree with Ian holme ,above ?in the 80s and 90s I used to fly at Elvington if memory serves me it was up for sale I had many words with Chris Bromley at the time about buying it for the BMFA SMAE his words to me were ITS NOT BIG ENOUGH TO HOLD THE NATS ?????? you could land the space shuttle on elvington and heres chris telling me its not big enough, he said what he ment to say was its not WIDE ENOUGH and the free flight boys would be going out of the airfield ??? I have been to the natsat barkston for a number of years and quess what the free flight boys go out of the air field and so do the chuck/n/duck as well I think its to late to do anything about the nats proberbly the end of an era

11/03/2016 09:53:37

what is wrong with you honky tonks this is the third time I have mentioned this WHAT ABOUT WOODVALE er????? near the m6 motorway? and m27?? not much difference on size to Barkston, probably would fill all the needs to hold the nats and has been used in the past for model aircraft shows, is it because its TO FAR NORTH is that the problem for goodness sake WAKE UP

01/03/2016 16:09:06

er just go back a few and read AGAIN maybe the B M F A can get it sorted for next year ????????????? the phone number is there and they do hire it out

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
CADMA
Wings & Wheels 2019
Slec
electricwingman 2017
Sussex Model Centre
Cambridge Gliding Club
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us