By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Bernard Koussoulos

Here is a list of all the postings Bernard Koussoulos has made in our forums. Click on a thread name to jump to the thread.

Thread: Is it Murphy's law
03/04/2017 09:35:05

I suffer the butter fingers cyndrum .any thing small ie servo screws etc will drop from my grip as if by magic ,once dropped on my work shop floor it will never be seen again ,i think the work shop gremlin must have tons of servo screws .it is a night mare to be sure.disgust

Thread: Decals
30/03/2017 14:25:38

Hey Flyer, Thanks ,went straight there and got what i wanted great much apreciated .yes

30/03/2017 13:59:02

Help! pulling my hair out here i have tried every were to find some decals for my bird dog 2 large and 2 small pluss letters USAA any help would be apreciated very much cheers angry

Thread: New Top Gear
06/03/2017 12:34:28

It was,nt all that bad the only one i don,t like is the american guy ,loved the 2million f car but for that money i want to drive it not parke it in the drive and look at it i rather liked the idea of them driving three old cars into the ground and getting their butts kicked in a race with some old ladas i know ladas can move becouse i had one some years ago laugh

Thread: Bad News And Good.
04/03/2017 09:03:44

I think many peaple purchased the mag for the free,well not free if you pay £4or5,for the magi got t if and when i fancied the plan sorry but the mag does not a lot for me it,s a good mag don,t get me wrong but unless you have deep pockets m,i have,nt then it,s for you .shame really.i use this sight for any info i need and or tips good luck to the sight it,s for me,yes

Thread: Super 60 build, Big Bandit
01/03/2017 16:55:45

I have a merco 61 purchesed at a swop meet some years ago for £20 it was refubished and runs like a clock loves a big prop had it on my lanzo although my lanzo would be happy with a .40 wich it now has ..Iam lookinf for a plane woth a 60 merco .

Thread: Aircraft that are difficult to rc scale
01/03/2017 16:43:16

Flying bed stead as per farnborough 1950s that would be a chalenge seeing it had no control surfaces as such just jet engines .crook

Thread: Does This Happen To You?
23/02/2017 10:13:07

The best that ever happend to me was a guy in america answered an inquiry i put on FB for a smal nitro two stroke he gave me an os20 and an os40 granted they were stuck up solid but ten minutes and both were singing and he payed postage from arizona of $20 i had to pay £15 customs duty but were can you get two sweet motors for fifteen quid ? I do have a lanzo built but wings and tail feathers need covering  being an old age pensioner ( get the violins out money is bit tightso i have to wait weeks for something stupis that you guys buy instantly but thats the way of life i do love building  ,it keeps the old brain active .frown

Edited By Bernard Koussoulos on 23/02/2017 10:17:55

Thread: new home for paw
22/02/2017 13:06:08

Go on then message me. £15

Thread: Plans exchange
22/02/2017 13:03:29

Hi every one ,iam going to throw this in the pot hoping some one will help i am looking for a plan of a cannard plane calledSAI_AMBROSINI SS 4yes any one can help i would be gratfull .

Thread: new home for paw
22/02/2017 11:38:51

one tenner .thanks for the offer make it15 and you have a deal,I can asure every one i am not trying to off load my rubbish ,this motor is a good one , i purchesed it from a model shop,and got fed up sourcing fuel , to be honest i can,t be asked so there it is ps thanks for that bit of info Bob Cotsforddisgust

20/02/2017 12:37:31

Such is progress every thing is electrie now shame really as far as i am concerned ic is all about the hobby / sport sarcastic nd when you put some thing up for sale you open you,r self up to so many time wasteres and know alls .

12/02/2017 10:40:07

My god ! i,ll just go and blow my brains out should i ? the wood screw incedentaly was were i had the motor attached to a wooden mount to test run it ,so many negative comments here thank you all .no

05/02/2017 11:22:59

Well iam serprised it did,nt sell ,bet if i said it,s a freebe it would go .no not giving it away i waould swop for a nitro motor same size.if not i will keep it it wont

eat any thing it can sit in my draw with some other motors.thumbs down

Thread: Roto 4-strokes - any expereince?
01/02/2017 14:35:18

That,s a fair bit of kit ,and any thing that size and its over my head, nicee though,disgustcrook

Thread: A big pile of shavings later!
01/02/2017 09:37:02

Beutifule model i can,t get over how perfect you have made it

Thread: new home for paw
01/02/2017 09:23:12

Nothing wrong with it it sperfect .very good compession is spot on ,it.sclean .I have it on ebay and gum tree so if you want it be fast.

Edited By Bernard Koussoulos on 01/02/2017 09:25:14

31/01/2017 14:17:33

dscf2374.jpg

31/01/2017 14:17:07

dscf2372.jpg

31/01/2017 13:43:30

dscf2373.jpgPAW . 19 Diesel aero motor for sale £ 25 ono thanks Bernie

Edited By Bernard Koussoulos on 31/01/2017 13:52:34

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Slec
Sussex Model Centre
Cambridge Gliding Club
CADMA
Wings & Wheels 2019
electricwingman 2017
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us