Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: Just Curious|
i thought there was an exemption in place if you have cert until 31/1/20 or is it 23/2/20
|Thread: Galaxy Domino lower wing dihedral|
tried to buy the domino kit but its no longer available, got its wee brother the jester though
|Thread: Buying LiPo`s|
DO NOT repeat DO NOT buy from HK global, you will get hammered in duty and postage handling fees
UK and EU are fine
Edited By rcaddict on 11/12/2019 13:12:17
|Thread: cowl using autocad|
im sure it would be ok on its nose, good point about heat hadnt thought about that cause its electric
thanks will give it a go (not heard of lofting but will look it up)
thats exaclty what im after,
was it made up in sections on autocad (I hadnt thought of doing that) ?
hope someone can help
i use a very old version of autocad for my 3d printing but when i try to design a cowl i can never figure out how to have a offcentre extrusion like a wot 4 cowl
hope this makes sense to someone
|Thread: HK black friday ?|
what no hobbyking black friday sale this year !!
|Thread: voltage/brown out capacitors|
are thay worth installing - do they work
|Thread: Which servos for a Boomerang & a Nova 40|
try to avoid orders over £15 from outside eu as you could be hit with duty etc
|Thread: hobbyeagle A3 V2 PPM setup?|
setup = DX8 G2, ORANGE R615 Rx, A3 V2 gyro
im wanting to set up my gyro with the single ppm lead, so far i know that i put the lead into the rx bind pins and into the sbus on gyro but what do programme the receiver on the gyro to, std receiver, sbus or sbus2 ??
do i have to programme the Tx as well
any help would be good
|Thread: 5s / motor|
55amps on a 10x6 - esc is 60a - will drop down to 9x6 !!
yeah i can prop it down and the esc would be ok my worry is if the motor could handle the voltage, i would not need full throttle
Edited By rcaddict on 02/11/2019 10:12:32
would i get away with using a 5s lipo (25c) on a motor rated at 2-4s, motor is 3536 1200kv, (i dont have any 4s right now)
|Thread: Sound module|
i thought electric flight was meant to be quiet
thanks for that dennis but it doesnt compare the A3 V2 ( not A3 L V2) i suspect thet the pro has superceeded the A3 V2 but not sure
can anyone tell me the difference between the Hobbyeagle A3 V2 and the A3 PRO, also which one is the newest, I have emailed Hobbyeagle but not received any answer yet??
|Thread: Model flying Ooop North...|
is that like watching paint dry
whats happened to the WIN section where we enter various draws etc ???
|Thread: M6? Not If I Can Help It......|
that was the thing percy - it was a flashing red light not orange - breakdown guy said that was the way fiat's and alfa's were !!!! - quick reset and onward
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!