Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: Anyone used the Spektrum AR410 or 620 receivers ??|
AR410 - you will know this - does it have the single lead ppm for stabilisers
am i right in thinking these AR610 Rx's dont have PPM
|Thread: 3D Print - wot 4 cowl|
great thanks martian its for the foamie but i can adjust the dimensions to suit - thanks again
I dont suppose anyone has an stl file for the wot 4 ARTF cowl they could email me to help with my rebuild
|Thread: Poor Service from Banggood- Buyer Beware!|
thanks for the insight graham, thats very interesting
that would maybe explain the recent addition of shipping charges at BG, personally I have noticed delivery is quicker just now
I notice banggood now charge shipping on items so not such a good deal on low cost items now
|Thread: Does anybody know how to fix this?|
is this not the one
|Thread: Just Curious|
i thought there was an exemption in place if you have cert until 31/1/20 or is it 23/2/20
|Thread: Galaxy Domino lower wing dihedral|
tried to buy the domino kit but its no longer available, got its wee brother the jester though
|Thread: Buying LiPo`s|
DO NOT repeat DO NOT buy from HK global, you will get hammered in duty and postage handling fees
UK and EU are fine
Edited By rcaddict on 11/12/2019 13:12:17
|Thread: cowl using autocad|
im sure it would be ok on its nose, good point about heat hadnt thought about that cause its electric
thanks will give it a go (not heard of lofting but will look it up)
thats exaclty what im after,
was it made up in sections on autocad (I hadnt thought of doing that) ?
hope someone can help
i use a very old version of autocad for my 3d printing but when i try to design a cowl i can never figure out how to have a offcentre extrusion like a wot 4 cowl
hope this makes sense to someone
|Thread: HK black friday ?|
what no hobbyking black friday sale this year !!
|Thread: voltage/brown out capacitors|
are thay worth installing - do they work
|Thread: Which servos for a Boomerang & a Nova 40|
try to avoid orders over £15 from outside eu as you could be hit with duty etc
|Thread: hobbyeagle A3 V2 PPM setup?|
setup = DX8 G2, ORANGE R615 Rx, A3 V2 gyro
im wanting to set up my gyro with the single ppm lead, so far i know that i put the lead into the rx bind pins and into the sbus on gyro but what do programme the receiver on the gyro to, std receiver, sbus or sbus2 ??
do i have to programme the Tx as well
any help would be good
|Thread: 5s / motor|
55amps on a 10x6 - esc is 60a - will drop down to 9x6 !!
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!