Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: ASP Engines|
as long as you use paypal
|Thread: Yet another request for model identification.|
why is that then
|Thread: pop bottle cowls|
denis - I will varnish the mould as you suggeand try again
so ive made the balsa mould and everything goes ok until i try to remove the mould from the shrunk plastic, any tips
|Thread: mini servo chattering|
RC - analogue - yes they are long enough for a loop - whats emf?
Percy - tried 3 different leads
i switched to hxt90's and no problems
thats food for thought don
have just bought emax metal gear 12g mini servos from china, however when i plug in servo lead extension i get random servo chatter (its fine when connected direct to rx) have tried 3 different servo leads and all the same - any ideas
|Thread: Best Heating Option For Your Hobby Shed|
all very interesting but cant help thinking that the £150 price tag would buy you circa 600 hours of continuous 2kw electric fan heater - i think
|Thread: model identification please|
i can see now that it is scratch built, it has an unusual feature (for me anyhow) in that the control horns are inside the rear of the fuselage
its a built up wing btw
this one came into my posesion but can anyone enlighten me as to what model it is, wingspan is 65"
|Thread: pop bottle cowls|
thanks richard i will try again - you make it look easy
just tried to make a cowl using the shrink method but wasnt very succesful as the bottle was quite thick plastic, am i right to think cheaper thinner bottles will work best
i use them often - but beware you will pay duty over £15
use the promo codes
Edited By oldgit on 15/12/2018 10:23:30
|Thread: Same motor with different kv|
what is the point of having the same motor with different kv - eg the turnigy g46 easymatch has 3 models 420kv, 550kv and 670kv. i dont see the point as surely you would pick the highest kv so you can use the smallest prop - or am i missing something
Edited By oldgit on 07/12/2018 10:14:42
|Thread: e-gangster CoG issue|
yes thrust line was the same - or not far off
just had a prang with an old gangster 52 that i converted, i suspect the the Cog was too far forward as when i throttled back to land it kind of dived into the ground (all repaired now) also elevator was sluggish requiring a lot of input - does this sound like Cog issue to you guys?
|Thread: turnigy G46 bearings|
bearings ordered from simply bearings - thanks guys
hi dave - yeah defo rear bearing
i dont suppose anyone knows the size of bearings for this HK electric motor
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!