Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: Same motor with different kv|
what is the point of having the same motor with different kv - eg the turnigy g46 easymatch has 3 models 420kv, 550kv and 670kv. i dont see the point as surely you would pick the highest kv so you can use the smallest prop - or am i missing something
Edited By oldgit on 07/12/2018 10:14:42
|Thread: e-gangster CoG issue|
yes thrust line was the same - or not far off
just had a prang with an old gangster 52 that i converted, i suspect the the Cog was too far forward as when i throttled back to land it kind of dived into the ground (all repaired now) also elevator was sluggish requiring a lot of input - does this sound like Cog issue to you guys?
|Thread: turnigy G46 bearings|
bearings ordered from simply bearings - thanks guys
hi dave - yeah defo rear bearing
i dont suppose anyone knows the size of bearings for this HK electric motor
|Thread: Building board|
plasterboard works for me
|Thread: gangster 52 cog?|
picked an old gangster 52 which Im converting to leccy, anyone know the correct COG, search could'nt find anything
|Thread: laser cutter|
Mmmm - quite fancy a diy laser cutter - how does it work do yoy prepare drawing on autocad then export file to suit the cutter (like you do with a 3D printer)
|Thread: Flying in Cumbria|
what are you talking about i had several breaks to the lakes in may, june & july and didnt see a drop of rain !!!
thanks for info - will load up with wot 4, teksumo and a seamaster (have flown from ullswater before)
and Im from scotland so know all about weather !!
hi guys - off on a short break to Keswick and Penrith areas next week, is there anywhere I can pull the Motorhome over for a quick flight
|Thread: HK postage charges|
flight1 - i think its 50 dollars not £££ - a good deal
|Thread: bullet connectors|
if using bullet connectors between lipo and esc what is the normal - ie should the positive wire on the esc be male bullet ??????
|Thread: acetate help please|
thanks guys now ordered - found out that a micron is a millionth of a metre !!!
i need an a4 sheet of clear acetate to repair my precedent T180 front curved windscreen. i ordered a sheet at 0.1mm from ebay but its much to thin - question is what thickness/weight should I be ordering
|Thread: 5v or 6v servos|
I have 6v mini digital servos in my teksumo wing but Im just thinking this is wrong cause the bec is 5v ( i think ), any thoughts? should it be the 5v servo version, it all works fine though
edit - just looked again at spec - it says voltage 4.8 - 6v
Edited By oldgit on 10/04/2018 10:47:01
|Thread: Flyaway model, what would you do?|
RAF Search and Rescue - I've heard it all now !!!
|Thread: WMWF Ullswater March 2018|
i certainly seen powered craft when i was there
Edited By oldgit on 02/04/2018 11:32:30
I dont think speed boats are banned, its just that there is speed restriction,
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!