Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: 35 mhz - any value|
I have a load of 35 mhz futaba tx's & rx's which there is no way i will ever use again, is it worth selling or are they worthless
|Thread: Yes... another ESC question!|
|Thread: Seagull Dual Ace Laser Build|
dont think i would like to start my ic journey with twins - one engine is enough to going on with - IMHO
anyone got a file to print a spitfire canopy :-
|Thread: aliphatic glue|
why is aliphatic pva glue yellow , is it dyed ?
|Thread: ripmax rapier CoG|
ive put a spare turnigy sk3 4250 410 kv on a 5s 3000mah - but to be honest i dont think it will be man enough. it originally had a OS40 LA in it, I will give it a go but as i have my doubts
found it - 405mm in front of rear of fuselage - whos a clever boy (googled)
dug this out of the loft for a quick leccy conversion job however the ic was removed years ago and i have no idea where the cog should be, can anyone help me again ??
Edited By oldgit on 19/02/2018 15:44:09
Edited By oldgit on 19/02/2018 15:45:05
|Thread: Max Thrust Riot|
move the throttle trim to full down position (as rob indicated)
have tried loads but i use these - they are comfy over specs
daveyp - you do know that if you spend $50 u get free post !!
personally it drove me nuts that solarfilm was only 50" long which meant overlaps
|Thread: Slough Model Centre Web Site??????|
never had any probs with slough, always good service and prices, it will just be a blip
|Thread: spinners and cooling|
not available uk or eu though
do spinners reduce electric motor cooling when they are inside a cowling, ie when the spinner dia is bigger than the cowling aperture dia !
|Thread: spitfire 60 artf CoG|
just converted to leccy but can anyone advise me where th cog should be for this spitfire, its about 15 years old and I cant remember the make maybe black horse or ripmax, should i settle for 1/3 wing chord
Edited By oldgit on 16/01/2018 17:54:13
|Thread: Amateur Radio operators?|
just looked it up - I'm wrong again !!!
i thought pan pan (and mayday) was for maritine only
Edited By oldgit on 18/09/2017 21:14:17
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!