Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.
|Thread: general help|
what about HK phoenix 2000, its a good flyer and also popular
|Thread: Telemetry - do you use it? What do you think of it?|
|Thread: My Spektrum DX9 transmitter has stopped working.|
surely then we should be sending to the USA for warranty repairs etc
|Thread: burnt ESC smell|
thats the problem i have it stinks the car out. good tip about sealing will try that
the burn out was caused by trying to take off through puddles when the prop hit resistance of the water at full throttle - new esc - all ok now
had a ESC burn out (whilst on ground) a few weeks ago in my wot4 artf but now i cant get rid of burnt smell inside fuz , have tried talc powder but to no avail - anyone any ideas
|Thread: I've never seen this before.|
not much chance of thermals up here in scotland
|Thread: powered flying wing question|
ok so ive put my new tek-sumo together ready for maiden tomorrow - but just wondering how do i stop the prop breaking on landing, is it an ESC Brake on situation ???
Edited By oldgit on 25/08/2017 17:09:56
|Thread: Horizon Hobbies|
your lucky guvnor i placed order last tuesday - still waiting and no answer to emails
|Thread: hobbyking tundra|
velcro works for me - 100's of flights and no problem
|Thread: ca de-bonding|
whats the best method of debonding super glue - does acetone work
|Thread: upgrading to dual heads|
the answer is yes to all your questions, it is very easy to change filament even during print
|Thread: ripmax artf covering|
just received my new ripmax wots wot & wot 4 artf and am a bit disappointed that the covering is going to need creases taken out, is this normal and whats best for this iron or heat gun, if its an iron out job what temp for this foreign stuff ive only used solafilm before
|Thread: lipos in parallel|
cool - this is good news
would it be ok to put 2 lipos of equal capacity in parallel even if they are different brands
|Thread: redundant 35mhz ?|
wasnt actually a typo - just my wee joke
thats my point John, its not getting used, I have about 15No 2.4Ghz Rx's now, my Tx is a DX8 G2 with a 250 model memory so cant see me ever using them again
having a clear out and I have a whole load of various 35mhz Rxs (futaba & micron) and I dont know what to do with them, are they worth anything ??
the Tx's will do for my stimulator
|Thread: D H albatross|
Tony not sure what cad package your using but I think the smoothness is needing adjusted - in autocad its tools/preference/performance to adjust smoothness
|Thread: How accurate is Phoenix 5.5.1|
I cant find the test folder inside the phoenix builder to unzip to !!!
update - found it
Edited By oldgit on 17/03/2017 09:38:52
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!