By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for rcaddict

Here is a list of all the postings rcaddict has made in our forums. Click on a thread name to jump to the thread.

Thread: upgrading to dual heads
23/01/2017 08:18:35

ian, thats a good point about the sd card being safer/stable

it will be here today so will soon find out wink

Thread: Wanted: Wot 4 Foam E
21/01/2017 16:34:15

Tom what you need is gorilla glue, my wot 4 has been resurrected many many times !!

Thread: upgrading to dual heads
16/01/2017 14:09:03

i am thinking of upgradng to a dual extruder printer, i am looking at a makerbot replicator 2, problem is it uses x3g files when im used to gcodes from cura, however i read a review where it mentions gcodes from cura can be used from a sc card - can anyone confirm this

OG

Thread: 3D print jawdropper
15/01/2017 13:04:12

thanks Ian, its amazing how you dream up things to make !

wouldn't it be good to have on this forum a library of stl files relating to our hobby that we could share

12/01/2017 13:42:45

Ian didnt see that design - was no problen to curve the ski just heated with hot air gun and moulded round an aerosol can - quivk & simple

Thread: Wanhao i3 Duplicator V2
12/01/2017 09:50:43

andy

its not a release its the opposite - to hold the print on the bed - i use photo mount out the pound shop

Thread: 3D print jawdropper
08/01/2017 10:40:46

tundra skis

here is end result - only took 4hrs after adjusting the settings in cura - now whats the forcast20170108_102812.jpg

07/01/2017 12:36:32

found a stl file on the net for a pair of snow skis for my tundra so thoughjt I would print them - so got it all ready - oh oh print time 9hrs !! - - - - EACH !!!!!!!!!

Thread: The new Spektrum DX6E tranny
06/01/2017 18:05:28

robert - just remember that the new spektrums are DSMX only, DSM2 Rxs will not work

Thread: Original Prusa i3 Mk 2 kit
05/01/2017 21:16:58

delta

dont know what you know about this but this is how it works - there are two parts to this (stl files & gcode files), there is the modelling software which you create or download your project (stl files), then you load it into the printer software "Cura" (supplied or downloaded).

the modelling software did not come with my printer but I use tinkercad (free download) for basic stuff and autocad for more advanced

once you have created the file (gcode files)for the printer in cura you put it on a mini SD card and insert it into the printer then play about with the hotbed & extruder settings - then make a cupof tea and wait !!!!!!!!!!!!!!

p.s. you will find loads of stuff ready for printing on the net

p.p.s you can download tinkercad & cura to practice without having a printer

its fun and if I can do it anyone can !!!!!

Edited By oldgit on 05/01/2017 21:18:20

05/01/2017 18:28:45

so David

what have you made, practically so far Ive made xt60 safety caps & a door wedgelaugh

Thread: Back to RC Aircraft after 20yrs.
04/01/2017 15:19:31

Tom

one good thing abot foamies are thet are easy and quick to repair

but there not so good in the wind

Thread: DX7 Black - sudden 'System Fault' - waaaah?!
03/01/2017 10:29:55

did it work ?

Thread: Newbie here. Burnt out motor...
03/01/2017 09:29:46

as newbie to 3D printing myself I have to wonder how long this takes to print - must be weeks !!!

Thread: Malyan M180 3D Printer Thread
30/12/2016 18:07:11

thanks for info ian, im getting on ok with autocad 3D & tinkercad, hoiwever my new filements arrived today and guess what I went and ordetred ABS instead of PLA !!!!

had a go with it but its a devil to get to stick to the bed !!!!!!!!!!!!

Thread: Setting up new field.
29/12/2016 11:01:13

as mentioned above if you discuss with planning officer first then you are commited to application, might be a delegated decision so local councillors might not involved

29/12/2016 10:47:18

if it were me I would see how it goes for the first year and then decide, worst case scenario you have to do retrospective planning.

but don't put any permanent sheds on site and don't annoy any neighbors

Thread: Wanhao i3 Duplicator V2
23/12/2016 23:00:03

colin

dont worry Im on day 2 and if your like me you will be printing "off the shelf" upgrades for your printer so you will soon get used to it wink

Thread: USB cable
23/12/2016 16:34:05

Pursa i3 A8

whatis the usb cable meant top do - should I when its connected be able to print direct to 3d printer, at the moment it I only see the sd card on the 3d printer screen

any help please

Thread: Malyan M180 3D Printer Thread
23/12/2016 09:34:50

what drawing software do you use?

the thread doesnt mention what drawing software is good !!

I have used autocad for 20 years - the devil you know !!!!

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
electricwingman 2017
Cambridge Gliding Club
Slec
CADMA
CML
Sussex Model Centre
Wings & Wheels 2019
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us