By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for dirk tinck

Here is a list of all the postings dirk tinck has made in our forums. Click on a thread name to jump to the thread.

Thread: Chris McG F-86 Sabre Dog build blog
02/05/2020 23:21:34

I'm at thesame page at the moment Chris !I glued the front part to the fuse with 30min epoxy, mixed some cotton flakes in it together with black pigment in case it gets visible from the inside .I'm going to paint the frame before i glue it to the canope,also with blacked epoxy. Make sense?

Thread: Sabre made in Belgium
02/05/2020 22:04:24

Assembled the brakes today so i don't have to do it when all is painted.The inside edges will be painted together with the fuse .The photo is not yet glued in place.Me happy

20200502_225604.jpg

02/05/2020 11:15:38

I used low tack masking tape on the outside just beside the place where the inside vinyl had to come.

It takes a lot of mesuring on a surface that you better not touch to avoid scrathes.

I found out that ,once the vinyl "grabs" the plastic,it's very hard to remove it without leaving glue residu behind.

01/05/2020 23:05:48

On the inside !

01/05/2020 23:03:28

Yes Phil, 1mm cuts beerpfff...

01/05/2020 22:58:41

Another little detail with great value imo

20200501_235430.jpg

01/05/2020 18:01:53

20200501_185209.jpg

01/05/2020 18:01:21

Made myself a sabre rotating bbq stand so i can't damage the fuse while sanding it .

It will be a great help painting and masking toowink!

20200501_185152.jpg

Thread: Phil's F-86 Sabre build thread
01/05/2020 13:38:02

Had to think on this one ...

I would try to put the second layer on with the first still wet , and without the use of more resin,to save weight. wink

Thread: Chris McG F-86 Sabre Dog build blog
30/04/2020 23:31:54

Hi Chris ,great job !

Wich glue do you use to attach foto's to balsa ?

Do you varnish them before glueing them ?

Cheers , Dirk

Thread: Sabre made in Belgium
30/04/2020 23:17:45

Same here Rob ,that's my biggest concern for the moment !Getting there...

Thread: Phil's F-86 Sabre build thread
30/04/2020 23:14:13

Great job Phil !

I think with two layers of 25 gr glass and perfect sanded foam you can win from brown paper and glass.

Just my opinion ...

Thread: Sabre made in Belgium
27/04/2020 23:06:13

If we ever get to the Orme again....I saw on the news that the Orme goats got into town todaysmile o!!

Thread: Chris McG F-86 Sabre Dog build blog
27/04/2020 22:37:37

Exelent detailing Chris ! Makes me want to start over again !

Anyway ,it's too late and i'm going on with the actual finishing of the aircraft !

Cheers , Dirk.

Thread: Sabre made in Belgium
27/04/2020 22:25:27

Hi all ,

Looks like this detailing is going to take forever ,and looking at other blogs,the''to do'' list is only getting longer...

Last thing i did was painting the seat and the back part of the cockpit

20200427_222033.jpg

Next thing before the real painting is to finish the inside of the brake bay's

Thread: Chris McG F-86 Sabre Dog build blog
27/04/2020 09:10:38

They will never fly ....

Thread: Phil's F-86 Sabre build thread
24/04/2020 08:36:34

It's just a tryout from a few jears back. I'm sure i can get them under 30 gr...and you could too!

Thread: Chris McG F-86 Sabre Dog build blog
23/04/2020 23:45:24

Looks great Chris !How did the Magnums taste ?wink 2

Thread: Phil's F-86 Sabre build thread
23/04/2020 23:39:23

OK , you win Andycrying 2

20200423_233816.jpg

Thread: Sabre made in Belgium
23/04/2020 23:33:54

While everything is drying,i started to detail the cockpit.

First thing is to seal all the wood parts with G4. It's a sort of varnish to get rid of the wood nerves,we don't want them to be visible trough the paint.

20200423_231531.jpg

x

x

x

Latest Forum Posts
Support Our Partners
CML
Slec
electricwingman 2017
Sussex Model Centre
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!