Here is a list of all the postings jclassic1 has made in our forums. Click on a thread name to jump to the thread.
|Thread: 4 year lay off|
Thanks Phil 9 and Mowerman for your suggestions ,I will check them out.
Having built a couple of kits from west wings a good number of years ago I must say that the quality of them was very good.
I do like the look of their Fournier R4 which they list as a powered glider .
I had been building and flying all sorts of scratch built foamies for over 10 years but 4 years ago I just lost interest and packed up flying.
About 15 years ago I bought a Easy Pigeon ARF glider with the idea I might be able to teach myself to fly but I could never build up enough courage to give it a try so it was left in the loft until I had learnt not to crash so often.
Then I got into scratch built foamy planes which being cheap to build and expendable actually got me flying.This was not a quick learning curve and it took the best part of a year and probably a dozen planes before I got the hang of what I was doing.
Well I turned 65 this year and now retired with lots of free time I remembered I had my EP in the loft and thought I would give it a try out.
First job was to replace the heavy can brushed motor with a much lighter Brushless outrunner.
I also did away with the huge and heavy nicad pack and used a 3 cell lipo .
This has saved over 1 pound in weight over the original.
I have now flown it 4 times and also bought a used Orion "E" glider which has also been converted to brushless .
I am having a great time just floating around when the wind id being friendly and now feel that as these two gliders are RET I really would like to build an aileron glider.Nothing too sporty just a mild 2 metre wing floater so I am looking for some suggestions from you lads on here of what you would recommend .It has to be a woody as I have had my share of foamy planes and I do like to build.
It,s great to be back flying with the birds but these gliders fly a lot higher than my old foamy 3D,s so it is testing my old eyes far more than before.
All the best
|Thread: Orion-E electric glider build blog|
I have recently bought an old brushed Orion E which I have converted to brushless and lipo.
Having not flown for over 3 years I felt like starting out again with something a bit gentler than my normal foamy 3D profiles.
I must say that after 6 flights the Orion seems to be pretty much dialed in now and have I started to enjoy the relaxing flight that this small glider gives me.
I run a Keda 1450Kv out runner motor and a 3 cell 800 Mah lipo.
I also have an Easy Pigeon that is also running a brushless set-up but have yet to try it out.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!