By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Andrew Calcutt

Here is a list of all the postings Andrew Calcutt has made in our forums. Click on a thread name to jump to the thread.

Thread: Aspen fuel
06/07/2020 15:53:52

has anyone on here tried Aspen Alkylate fuel for their petrol engines?Just bought some,comes ready mixed at 50.1,so I have added some more oil.It does not smell and lasts a long time without going off.Will let you know how I get on

Thread: Aurora 9x
30/06/2020 18:22:01

Pretty sure they don't make the aurora anymore,I have a couple and they have been great.Like the look of the jumper16

Thread: OS 91 surpass disassembly
29/06/2020 18:29:55

make sure you have taken the plug out holding the liner.Then heat up the body should come out,it went in!

Thread: Slipstream Sbach 342 coming out of retirement?
11/06/2020 18:15:25

To fill the cowl I use plasterers scrim tape,on the inside the tape is self adhesive.Then I put masking tape on the outside,I use frog tape.Smear the scrim with brown gorilla glue.when set fill the outside with plastic padding.I have just done a cowl for electric and it looks good.

Thread: Strange problem
10/06/2020 19:53:34

Make sure your transmitter trim is full y down,make sure the end point adjustment is 100%.The throttle position needs to be normal,not reversed.Hope fully this will work,to program it set the throttle to high the connect to the battery,you will hear a series of beeps.But for gods sake take the prop off.

Thread: Priory Models Silhouette
07/06/2020 22:19:51

Flew mine last week,flys well apart from a pain in the neck engine.I have decided to convert to electric,should be ready later this week.

Thread: Servo Advice
07/06/2020 09:27:32

I only use hi tec now,great range of servos,I highly recommend Steve Webb servo shop.

Thread: Electric help required
04/06/2020 21:30:40

1000 watt motor and 4 cells turning a 14 inch prop should do nicely,overlander have good range of motors.

Thread: What model is this
13/05/2020 19:36:10

Not a cap,they didn't have fairing on the wing,Not sure it's sukhoi,canopy looks a bit small,but could be.

Thread: The big question, WHEN
11/05/2020 20:05:23

I will be flying this week,need to fly those new models.

05/05/2020 19:13:44

Lockdown will soon be lifted as the money is running out

Thread: Smoking....
05/05/2020 19:11:28

Run it restrained only for a few seconds,it puts the amps right up.Like driving your car with the handbrake on.

Thread: Crow braking
28/04/2020 17:52:03

I always set crow up on a slider switch.That way you don't get all or nothing,also you may need a few degrees of down elevator.Always try to have full deflection on the maximum.

Thread: Priory Models Silhouette
19/04/2020 19:05:47

Looks very nice,silver looks very retro.A priory models fly in would definitely be a good idea.

Thread: Top Flight P40 - An ignored project
18/04/2020 20:21:09

The heat and cold has taken its toll,if it was me I would take old old sheeting off and reskin

Thread: Priory Models Silhouette
05/04/2020 22:10:42

When all this over I hope we can have a priory models fly in maybe at buckminster,something to look forward to

Thread: What Traders are still offering Mail Order? Services?
04/04/2020 19:31:35

Let's support these guys,and for gods sake don't use hobbyking,banggood we need to support uk business even if it costs a bit more.

Thread: Kyosho T-33 Shooting star
04/04/2020 14:44:15

Just got mine down out the loft doesn't look in to bad condition,luckily I still have the canopy.I have a 70mm 6 blade fan should run with 4 cells.I think I will cut the fuselage in half remove old fan and install new fan,then repaint it as it It a bit grubby.Give me something to do in the lockdown.

04/04/2020 12:13:36

Got one of those in the loft,this has given me a plan to get it down and fit brushless fan.

Thread: Insanity seems to be setting in
21/03/2020 22:03:02

This will be the end of democracy,I don't believe the virus thing,what we have here is for more dangerous.

Latest Forum Posts
Support Our Partners
Sussex Model Centre
Slec
CML
electricwingman 2017
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!