By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Marc ROCHE

Here is a list of all the postings Marc ROCHE has made in our forums. Click on a thread name to jump to the thread.

Thread: New EDF Mini Jets- Sabre & MiG15 RCM&E 2018 Special
05/07/2020 18:11:26

hi,

A short video of the MIG15 modified in this hot windy day.

https://youtu.be/0Pjh_Wc4Dyc

Go fast.

Marc

01/01/2020 22:15:09
Just a little message to revive the post. My Mig didn t support a fautly servo. I make a new plane
but i modified the tail to make it look like a Mystere II.

20191231_190630.jpg20191231_190646.jpg
Thread: New EDF Mini Jets- Jet Provost & Folland Gnat
13/11/2019 10:51:29

Really nice job Steve: chef-d'oeuvre!

We are waiting for the flight with impatience.

03/08/2019 12:58:14
Hi Tony,
To equip a Gnat, would you advise a 3S or 4S EDF?
The Mig flies marvelously well in 3S. But the Gnat is more compact and heavier.
Is 3S EDF sufficient or the 4S EDF brings significant power?
Thread: New EDF Mini Jets- Sabre & MiG15 RCM&E 2018 Special
09/07/2019 08:47:38
Posted by David Clark 18 on 08/07/2019 23:16:04:

This is my first ever posting. I've been looking at these two jets with keen interest and I can't wait for the phantom to be available. I intend to build the Mig 15 first as a practice so that the phantom hopefully will go without a hitch.

The club's flying site is a disused runway with cropped fields either side. Has anyone put landing gear onto one of these planes and If so how have you done it, or is there a good way of protecting the underside from the very abrasive runway.

As you can probably tell I am a relative newby and would appreciate any help you could give.

Edited By David Clark 18 on 08/07/2019 23:18:12

Edited By David Clark 18 on 08/07/2019 23:19:03

Edited By David Clark 18 on 08/07/2019 23:20:21

Can be try aluminium tape under the fuse. This is the solution I had considered before removing it, there's no sweet green grass at home.

Otherwise 2 rails in square balsa glued under the fuse, witch will be replaced by cutting and sanding if they used, a bit like the keel that is glued under the f86 sabre

09/07/2019 08:16:22

I replaced the video, I m not too smart with my post youtube.

https://youtu.be/tZPAQ0TMzOo

 

Edited By Marc ROCHE on 09/07/2019 08:16:46

Edited By Marc ROCHE on 09/07/2019 08:17:09

07/07/2019 15:14:18
I replace the 3D printing thrust tube by Xray film. I won 20gr in the queue.
(With the heat wave the PLA melted into the car!)
 
https://www.youtube.com/watch?v=WO1K8Pi3c4w&list=PLVwZ7Xc-U3ZKc_wUZdbNgKdGmAsg_ywCL&index=2&t=0s
 
I will make a variant of the mig and cut out the elements to make Mystere IVA.

Edited By Marc ROCHE on 07/07/2019 15:26:30

16/06/2019 21:45:25

I replaced the RcLanders EDF with a bangood FMS.
Effectively this one pushes well, in 3S the Mig keeps on the spot vertically.
Finally, his replacement was not too difficult.

First Mig flight this morning despite the wind. Unfortunately I could not make video.
First flight, the plane was very quick at the fins. Attenuation of the deflections to 60% for the second flight. I will have to retouch the mechanical deflections and the position of the Lipo for the CG.
He is magnificent in flight with his swept wing, and the landing is easy despite the 500gr of mine.

Well done Tony!

Thread: New EDF Mini Jets- Hunter & Phantom
09/05/2019 10:49:29

What are the differences in flight behavior between the models (Mig/Sabre vs Hunter vs Phantom vs Gnat vs Provost)?

Shades of agility, easy to fly, load wing...

Thread: SE5a - dogfight double
09/05/2019 09:49:34

Do you resolve the twisted wing?

08/05/2019 08:53:25

nice plane!

What kind of Lipo and ESC do you use?

Edited By Marc ROCHE on 08/05/2019 08:54:08

Edited By Marc ROCHE on 08/05/2019 09:03:03

Thread: New EDF Mini Jets- Sabre & MiG15 RCM&E 2018 Special
06/05/2019 23:17:34

What kind of glue did you use for mini-jet: wood glue or super glue, or both following the parts?

06/05/2019 23:00:12

Back after a break.

I received a new Fan from my seller, but it delivers only 2/3 of power (18A--->27A). I had to send him back again. angry 2crying. I'm crazy to don't fly it.

For my next i would take HTI/FMS Bangood Fan. I see the new exciting Tony Mini-Jets models. When will Phantom be available?

PS:

Glenn, beautiful golden scheme

Jack did you fly your red Mig?

Edited By Marc ROCHE on 06/05/2019 23:00:54

27/01/2019 21:17:12

Hi all,

Today too windy to fly and my turbine was unbalanced. I had to disassemble and cut crying 2 the fuselage to get out it.

postpone

26/01/2019 19:53:03

Hi all

+1 Mig15 squadron..

Tomorrows at morning take off!

20190126_144702.jpg

20190126_144455.jpg

20190126_144350.jpg20190126_144410.jpg

09/01/2019 23:02:25

20190109_205148.jpg20190109_205312.jpg

Hi all,

Soon finish. I hope it will be a nice weather for the first flight.

08/01/2019 06:38:25

Sorry, I need to change my glasses...embarrassed

I suppose it is Elevator +/8mm and Aileron +/-4mm.

05/01/2019 22:53:26

Sorry, I didn't see. It s front of me.

Marc

05/01/2019 19:20:25

What are the recommended control surface throws?

01/01/2019 19:46:46

Shaping wings, sticking and shaping tails, sheath passage. Sticking bottom sidewalls fuse. Pleasant building.

20190101_191545.jpg20190101_191652.jpgHappy new Years Alls!

Latest Forum Posts
Support Our Partners
CML
Sussex Model Centre
electricwingman 2017
Slec
Sarik
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!