By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Morgs

Here is a list of all the postings Morgs has made in our forums. Click on a thread name to jump to the thread.

Thread: First generation acrowot tail fin
22/01/2020 17:04:39

Is it best to glue fin on first then the sides, or do sides first then the fin. Or do it all in one go.

22/01/2020 13:55:32

20200122_134950.jpg20200122_134858.jpgWill put in that hinge when I repair it, also got missing piece but some of it missing.20200122_134909.jpg

22/01/2020 13:22:52

thanks all, where is the C & G on the Acrowot.

22/01/2020 10:47:58

Thanks everyone.

22/01/2020 07:58:54

20200121_181503.jpg20200121_181456.jpgfinally worked out how to upload pics lol, would thick ca sort it.

21/01/2020 23:13:44

Thanks kc found the Peter Miller guide I'm on it yes

21/01/2020 23:04:20

Thanks for your responses tried to upload photos but can't work it out, fin is complete just needs gluing back on and a repair to one side of the rear fuselage.

21/01/2020 17:44:36

Hi all can anyone help me, I've completely snapped off my tail fin on my acrowot there is no damage to fin but where the fuselage tappers down to fin needs replacing both sides. So need plenty of advice from the experts please on the best way to repair it please.

Thread: Not a new newbie
10/12/2019 14:02:45

Thanks for the info chaps, will start to build when I'm up and running bought most things second hand at the moment due to cost even down to a Harman Rocket III very good condition with ASP 60 and servos also flight box. My first build was a free flight Vernon Vespa with a cox pee wee engine in 1978 when I was thirteen then went onto radio control into the eighties, mainly low wing aerobatics and bi planes. My last was early nineties the first gen acrowot I think, which you did have to build not ARTF as they are now but not to sure, long time ago now.

09/12/2019 17:56:11

Thanks for all your nice comments, and I'll try not to pester you all to much lol smileyyes

Thread: Futaba T1OCP batteries
09/12/2019 17:20:51

ok thanks to you all feel like I've learnt something already thumbs up

09/12/2019 17:03:36

So how about this one for RX overlander Eneloop 2000 4.8v AA MiMH RX flat.

09/12/2019 16:51:36

Thanks Steve my trans has a Sanyo NIMH overlander 2000 mAh eneloop already in. Is that a decent battery and is that lithium.

09/12/2019 16:32:01

Thanks Don just trying to get my head around it all, seemed a lot simpler in the 80's. what I need I think is someone to say you need this battery for trans this for receiver and this charger and this switch, And these are for standard futaba servos as well,

09/12/2019 16:12:57

OMG my head is spinning already.

09/12/2019 15:51:55

Thanks for that going to have a look now.

Thread: Not a new newbie
09/12/2019 14:58:33

Hi all I'm Mark from Birmingham and this is my first ever post. I'm only a newbie from 1996 when I gave my hobby up when my son was born. I started aged 10 with my dad in 1976 as a member, on and off at the Sutton Park flying club West Midlands. Seems a lot more electric now but I'm sticking to nitro, the only thing that's puzzling me now is the batteries everything else seems pretty much the same. best place to ask a question about batteries.

Anyway love the site and I'm like a big kid now I'm back into the hobby I've loved and missed so much.yes

Thread: Futaba T1OCP batteries
09/12/2019 13:48:16

Hi all first question post so not sure if this is right place,

I've bought second hand T1OCP transmitter and R6O14FS receiver, need a receiver battery and want to replace trans one as well. the plane its going into is the Harmon rocket III so can anybody recommend batteries and charger please, and very sorry if this wrong place or section for post newbie.

Mark

Thread: Complete newbie.
09/12/2019 13:33:36

Hi all I'm Mark from Birmingham and this is my first ever post. I'm only a newbie from 1996 when I gave my hobby up when my son was born. I started aged 10 with my dad in 1976 as a member, on and off at the Sutton Park flying club West Midlands. Seems a lot more electric now but I'm sticking to nitro, the only thing that's puzzling me now is the batteries everything else seems pretty much the same. best place to ask a question about batteries.

Anyway love the site and I'm like a big kid now I'm back into the hobby I've loved and missed so much.yes

Edited By Pete B - Moderator on 09/12/2019 14:29:42

Latest Forum Posts
Support Our Partners
Sussex Model Centre
electricwingman 2017
Slec
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!