By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Colin Naylar

Here is a list of all the postings Colin Naylar has made in our forums. Click on a thread name to jump to the thread.

Thread: Advent Prize Draw - 4th Dec (post to enter)
04/12/2020 09:45:47

Me too please

Thread: Advent Prize Draw - 2nd Dec (now closed)
02/12/2020 11:45:18

Me too please

Thread: Mini flight stabilisers
22/09/2020 21:59:32

Thanks Jeffery, I'll try both...

22/09/2020 16:32:22

Thanks for the edit Dennis, I'll try that.

22/09/2020 14:24:45

Thanks Denis, I assume you mean 'Yes, lift the tail so that the fuze is parallel to the ground and then reset the NX3' ?

22/09/2020 14:10:27

I have a fitted a NX3 in my Mignon (Wot4 lookalike from a free RCME plan). First time I've used a stabilizer and it seems to work very well. I just wondered if I have set its initial position correctly. It is on the floor of the aircraft, and as its a taildragger, it is not parallel to the ground. Should I lift the tail so that the fuselage is 'level' and then re-initialise the NX3 before a flight? I'm not so sure about how these things work, do they relate themselves to 'levelness' or to their original position? If the latter then surely they would make the plane fly in a nose up attitude?

Thread: The Gov't, CAA, BMFA & UAV legislation thread
11/12/2019 17:56:19

So, I'm a lone country member flying in a neighbour's field. If I take a friend to watch and he asks to have a go, does he have to have passed the online test and paid the £9 ?

Thread: How can I upload my RCC
03/12/2019 16:50:40

Thanks GG

03/12/2019 16:41:55

I've just passed the BMFA Registration Competency Certificate online and printed out the actual certificate, but I seem to have missed how to upload it into my membership profile. Can anyone help please or direct me to the instructions? Thank you!

Thread: Caption competition!
20/09/2017 10:49:51

Jump in the back when I get the engine started - then I'll send it up and down the runway - that'll fool them!

Thread: Mentor v Funcub
08/07/2017 09:13:26

The Tundra does look good but it is not available in the UK or EU warehouses and the uncertainty of customs and the p&p puts me off. I'll contact Hobbyking and find out if this is just a temporary state. Thanks again all.

07/07/2017 17:37:50

Thanks for your replies chaps, especially to Speedstar for your videos. Obviously a bit more to it than I thought - perhaps I'll fit the flaps to the Mentor initially. My flying field can get a bit rough and length restricted as well depending on the nearby livestock - for that reason alone the short take offs and landings would be useful.

07/07/2017 12:34:54

Hi all, I have had a Multiplex Mentor for some years and am quite happy, albeit a little bored with it. I have never seen a Funcub in the flesh, as it were, but it tempts me very much. Is it worth me buying one for the fun of it or could I convert the Mentor to be pretty similar. Is it just a question of oversize wheels and flaps or something else more subtle, that makes the Funcub apparently so popular? I am a lone flier, clubs being many many miles away, so no hope of getting a side by side comparison.

Thread: RC Life website down
17/01/2017 13:46:27

Does anyone know anything about RC Life, their website seems to be down at the moment although I'm sure I was browsing it a couple of days ago?

Thread: Christmas Caption Competition!
02/12/2016 21:25:27

Some couldn't remember the Hokey Cokey sequence exactly....

Thread: Monokote
25/02/2016 18:14:38

Wheel Spin Models according to google Chris

Thread: Robins Pathological Basis of Disease
25/02/2016 11:02:50

Hate to be so pedantic Erfolg but I do believe it's Disease not Decease; however one does often lead to the other devil

Sadly I am too far away to benefit from your generous offer!

Thread: New year caption competition!
22/01/2016 12:11:07

Looks like some fool has tried to land his fixed wing on the helipad.

22/01/2016 12:09:33

The new Club RC Buggy has been quite successful at retrieving models from the outfield!

Thread: Ballasting model
16/09/2015 16:54:47

Adrian, I've sent you a PM

Support Our Partners
electricwingman 2017
Sussex Model Centre
Subscribe now
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!