Here is a list of all the postings Dwain Dibley. has made in our forums. Click on a thread name to jump to the thread.
|Thread: Confirmation - The World Really Has Gone Mad......|
I pay £45 per Annum already Martin, as a member of Cycling UK (formerly the CTC), in order to protect my self from irate and aggressive motorists. I will also pay the £16.50 reg fee and you can rest easy mate.
You may also be interested to know that road tax was introduced by cyclists, for cyclists, to keep the roads fit to ride on. That's the next jibe I usually get when encountering angry car drivers......You should pay road tax. It was abolished and we all pay for road repairs thru our council tax bill. V.E.D is based on emissions, which sounds like you should pay more if that much black smoke comes out of your tail pipe. You may want to ride your bike more, that way you may be more patient when encountering us more vunerable road users.
I also own a big Van.
It is the responsibility of all road users to look out for the more vulnerable users on the highways.
When I drive my van I look out for cyclists and pedestrians and animals, when I commute to work, I cycle, and I look out for pedestrians and animals, as I assume vehicle drivers are looking out for me.
I thought everyone is taught this. Plus it's in the highway code.
You should try cycling to work for a month Gary, it may change your mind.
|Thread: Building Brian Taylors Cessna 120|
One of them said he was growing a beard and changing his shirt.
If they had Bowler hats they could pass as the Thompson Twins.
I dug the Plan out for the L'il cub today and had a look.
The Lads turned up today, they had a pretty quick trip from China, no worries.
|Thread: Switching Brand|
Have you considered Radio Link. I have just purchased the AT10 12 channels, plus RX, plus SBus capability, plus Telemetry module. £140 .
Rx are relatively cheap @ £20.
|Thread: Elevator joiner wire plastic tube bearing|
Drew this to illustrate (hopefully) what I mean. i also posted this in your other thread by mistake. DOH !!
On my one the elevator join rod passes through an add on piece of balsa about 50 mm wide. This sits in between the two elevator halves, and is joined to the tail plane. The two elevator halves sit either side of the middle piece, the elevator joiner tube is glued in between the tail plane and the centre piece.
This pic shows the tail plane centre bit, where the tube is buried.
The elevator halves are then fitted onto the hinges and the joiner rod.
You can always omit the tube and add the elevators with joiner wire fitted then fit the centre piece, sandwiching the joiner in the pre grooved balsa. However you need to take care to not glue the wire in...........that is why the tube is used in the first place.
|Thread: Junior 60|
Removed posted here in error.
Edited By Dwain Dibley. on 18/06/2019 00:37:43
Removed, posted here in error.
Edited By Dwain Dibley. on 18/06/2019 00:38:39
|Thread: Li`l Cub|
This is something I want to build too Martin, so a build thread is just the ticket. Mine would be electric.
Looks the Mutts just now Mate, keep up the Stirling effort.
|Thread: 1/12 Messerschmitt Bf 109|
Fantastic Timo, I enjoyed the video immensely Mate.
|Thread: Junior 60|
I think the answer is, that it is not critical, all the J60's I have seen/flown do so with equal success.
If you construct the wing "equal" on both panels you won't have any problems when she takes to the air.
Good luck and keep up the good work.
Gary, I thought I had lost these pics of my J60 refurb, but here you go hope this helps with your wing tip build.
Zoom in Dood.. !!
|Thread: Ben Buckle Junior 60 build|
I did a refurb of a J60 I bought from a swap meet a few years ago, but all the pics have been lost. It was a bare bones buy, built but not covered and it would have helped immensely with the J60 build Q's we have had lately.
|Thread: DB Sport & Scale Sopwith Pup 60" ws|
Here we go Geoff..............................
Looking forward to this one, get stuck in Matey, lots of pics as well please.
|Thread: Weston Park Worth the Risk of Showers?|
Its a fantastic show.............whether its worth a 100 mile trip to stand in the rain I could not say. The local weather for Sat says showers after 14.00 at the moment.
The stalls are well worth going for and you may get to see some flying even with showers going on.
|Thread: Converting rubber power to RC|
A lot of guys use the innards out of the Eflite Vapour models.
|Thread: Maiden of Friend's O.D.|
Always a bit of a cycle clip moment when maidening a mates hard work.......Well done tho Cliff.
And what a gorgeous place to fly from/in/on.
|Thread: Corben Super Ace Build|
She's coming along nicely, despite the plan errors Phil.
Nice and tidy too, well done so far.
|Thread: Junior 60|
It looks a lot but it is correct Gary.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!