By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Mark Millward

Here is a list of all the postings Mark Millward has made in our forums. Click on a thread name to jump to the thread.

Thread: Covering material GS/HK
03/02/2014 11:37:55

A bit off topic but can anyone tell me where to get small quantities of doculam/armourclear/laminating film?

Mark

Thread: Online retailer
21/01/2014 21:16:42

Just getting back to flying. when I dropped off for a while GiantCod were the top online retailer. has anyone picked up the reins for price and fast delivery ?

Thanks Mark

Thread: jr 3810
12/01/2014 15:48:50

Thanks for the replies. Will do. However I did find one on a shop site but foolishly didnt bookmark it . Any ideas?

Thanks again

Mark

12/01/2014 11:22:45

HELP PLEASE..who would stock a battery bay cover for a JR 3810 ?

Thanks in advance

Mark

Thread: Petrol as a substitute for nitromethane ?
16/01/2012 11:09:45
Hi I have used it for a while and it works a treat. I was put on to this by a well known engine reviewer who may not wish to be identified so I wont but he lives a long way away. I use 400ml ish in a uk gallon of streight fuel
Mark
Thread: I hate Solafilm and Profilm
26/01/2011 22:33:03
Adverts on mine too
Thread: Won't deliver-can't deliver
17/12/2010 15:46:03
Flytilbroke,  what site do you use for your traffic cameras ?
     Mark
Thread: RCM&E 2010 Hobby Awards
03/12/2010 09:47:45
1 Sussex model center
2 Giantcod
3 Sig Rascal
4 MacGregor

Thread: "Paypal as a gift"
19/01/2010 17:27:06
  Now I have used it and didn't know that so thanks peevie. Wont be doing that again.
Thread: The Mode Survey - what do you fly?
12/01/2010 19:35:51
OOPS    Mode 2  !!!!!!!
12/01/2010 19:31:24
Mode 2
W scotland
W scotland
Self

Edited By Mark Millward on 12/01/2010 19:36:38

Thread: Aerobatic pusher
10/01/2010 20:02:38
Thanks JE thats closer but there just have to be others. I saw something in a mag but can't find it for the life of me.
  Mark
09/01/2010 16:58:42
   Thanks Dw and JE.  I wasnt very clear , I was thinking of F3A style aerobatics .stall turns or anything needing a rudder  elevator aileron.  any ideas anyone ?
  Mark
08/01/2010 19:28:37
     When my rough aerobatics go wrong the plane usualy noses in and I have wrecked a fair few motors and engines. My Stryker delta has been in lots of pieces lots of times but never broken a motor.  So question...can anyone sugest a pusher suitable for practicing aerobatics ?  Plans, KIts, Designs or even ARTF Thanks in advance.
    Mark
Thread: SmartDart xs-f
08/01/2010 16:35:50
I have built a few versions of this and all need a good bit of dihedral
Thread: Ideas for articles in RCM&E
08/01/2010 16:33:02
    Comparison tests used to be the lifeblood of some of the other hobby magazines such as boating and sailing.  Would RCM&E be a little leary of upsetting those manufacturers / advertisers who fall short.?  I have often bought a mag just for the comparison. Another benefit is that less detailed more waffly articles are nudged out. or at least the editor weilds his pen with more vigour !
Thread: qso's
13/12/2009 21:19:47
GM0 LNT usualy MM.  I will have to dig my gear out of the loft.
Thread: DIY BEC
01/12/2009 12:17:47
  Burst out laughing at that one  Phil. The 3055 and zenner. To think I have qualifications in electronics but cant remember a thing.
  Regards     Mark
01/12/2009 07:23:49
Phil    Could you post a little drawing of that circuit ?
  Mark
30/11/2009 21:32:40
Thanks very much all of you . My own electronics was based arround industrial digital and  TTL but that was years ago.  I think I will have a go at one or two of the suggested circuits . Has anyone tried a few diodes as a simple solution, a mix of germanium and silicone comes to mind
   Mark
Latest Forum Posts
Support Our Partners
CML
electricwingman 2017
Slec
Sussex Model Centre
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!