By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Fats Flyer

Here is a list of all the postings Fats Flyer has made in our forums. Click on a thread name to jump to the thread.

Thread: S1581 Hawker Nimrod MkI
04/11/2019 19:05:30

That's Martian and fates way telling you to STICK at it Danny.

06/11/2018 19:26:11

Hi Danny,

I've just put a photo of the cockpit shape from above in my Fury Photo album.

I don't know how to put images on the forum.

It comes from the Fury Profile publications number 18.

I hope it helps.

Vince

Thread: RAF's Finest Biplane? Hawker Fury MkI
15/10/2018 13:05:03
Shaping the leading edge first and adding carbon fibre tows would be easier to add strength and keep shape.

Edited By Fats Flyer on 15/10/2018 13:05:31

04/10/2018 21:27:38

If your interested,there is a write up on Outerzone of the plan,it might help with the build technique of the designer and produce a few light bulb moments.....hopefullysmile p.

 

 

 

04/10/2018 16:36:09
It does take practice Danny,i have the scar's and empty plaster boxes to prove it.
I have also got a few home made mini saws,breaking fine toothed hacksaw blades in half,then tapeing the top part with electrical tape to act as a handle.
04/10/2018 15:59:48
Andy i'll be using a Dremel type mini drill with a cutting blade to remove parts.
01/10/2018 13:04:39

Heard a clonk on the floor from the letterbox this morning.....YYEEESSSS....the parts are brilliant Ernie,Thank you for all your help.

Vince

29/09/2018 15:26:49
Patience.......whats that💣💥
29/09/2018 15:16:58
I know how you feel Danny😥
28/09/2018 10:09:26

Ooooohhhh, I hope mine arrive todaysmile p

24/09/2018 17:03:39

Thanks Ernie,..I like a bit of bling.

11/09/2018 18:22:50

hi Danny,

I am looking at doing the cowl with lithoplate.

I have quite a few sheets of the stuff,i will have to practise first.

I think litho will give a better look and finish.

Vince

24/07/2018 11:46:26

Hi Ernie,Paypal payment made.Have left a note on the paypal invoice regading delivery address.

Thanks for your time and help.

Vince

22/07/2018 22:13:17
They look good Ernie.Please put me down for a set.
Thanks
Vince
10/09/2017 20:25:05

Hi Danny,

Thanks for the offer.

I am going to make all my own stuff.It will take longer,but will be enjoyable all the same.

Every project has it's spanner in the works moment,we have had ours regarding Traplet,let's hope the rest will be easier and fun.

Vince

02/08/2017 20:39:27

Using pull pull cables will be a lot lighter than push rods,especially at the rear.

I used the pull pull system on my PV-7,it's very quick and easy to do.Just make sure that the runs to the rear are snag free when fitting.

I used a carbon rod at the front with paxolin horns epoxied to the rods and a short control linkage to the servo.

Fishing trace wire is what I used with fishing ferrels to fix the line in place.At the front end I used an adjustable linkage to attach to the horns for easy adjustment.

I will try and get a few piccies up at the weekend to show the system I used if it helps.

21/07/2017 21:39:02
Posted by Martian on 21/07/2017 21:30:44:

Anybody finished yet

I've finished buying everythingsmiley

20/07/2017 11:48:30

If you are going to clad the cowl with lithoplate,you should be able to change the angle slightly at the front.Also looking at the spinner ,the backplate could be set on a pillar drill and filled down 2 or 3 mm.

Doing both should give a nice clean line.

19/07/2017 18:18:02

Wow,it is a shame.Danny ,I think you are right.

Ive just looked at their website and it does state that the shop store is closed.

I hope everyone gets what they ordered.

19/07/2017 14:30:32

Just checked mine.mines the same,Spinner is a lot bigger than the line at the front of the cowl.

Latest Forum Posts
Support Our Partners
Slec
Sussex Model Centre
electricwingman 2017
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!