By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for andy paterson

Here is a list of all the postings andy paterson has made in our forums. Click on a thread name to jump to the thread.

Thread: Motor to esc
16/10/2019 15:13:18

Hi Trevor

https://www.4-max.co.uk/. George is very knowledgeable they will help you out and chances are they will have the wire.

09/08/2019 14:35:48

Thanks Martin and Alan

09/08/2019 14:29:27

Hi all

I have always connected the motor to esc with the lengths of cable supplied with items but can you add same cable to give 2" to 3" more .

Look forward to replies

Thread: Advice please
02/07/2019 15:57:39

Hi all

Not a beginner with flying , have not taken A cert, my test should be imamate ,just the questions to sort , I have a wot4 e foam, where I fly can toss the plane around, I love ic planes which plane would suit there area or my position ,I would be looking at ic plane .

Thread: Isabella RCM&E plan
18/08/2018 10:14:57
Hi Levanter, no not started yet, had an accident with the wot trainer so I'm sorting that out first
Andy
07/08/2018 15:31:29
Hi Alan
Nothing wrong with enya at all, I have an OS25 new sitting in a box doing nothing but I could not find details of the Enya engine .
07/08/2018 13:20:39
Hi all
Looking at building the new plan in this month's mag, it's going to be IC engine, I have few spare engines but what would be the equivalent engine size for enya 09 , I have Googled but not much info , maybe I am getting old and the eyes are not so good
Thread: WOT TRAINER
21/07/2018 15:51:14
Hi Denis
I have her on tickover on landing but she still floats on , I do have a 12x6 APC prop , would you recommend something else ?
21/07/2018 14:46:24
Hi Tel
I have a wot trainer , with Irvine 53 upfront nice plane to fly but they do like to sit in the air on landing .
Thread: Irvine 53mk2
08/07/2018 18:33:30
Thanks Martin
08/07/2018 13:30:27
Hi all
Just renewed front and rear bearings on irnive 53 silly me forgot to mark the backplate ,I'm hoping I'm right in saying the flat on the backplate is upper most so piston will not hit it
Thanks
Andy
Thread: Auster AOR 9 engine advice
23/12/2017 21:37:46
Thanks David , that is handy to kniw
23/12/2017 20:35:37
Thanks all for the help , thank you Keith for the email
23/12/2017 16:53:44
Engine doctor , thanks for the reply ,the saito is the newer one with muffler
23/12/2017 13:56:08
Message sent kc
23/12/2017 13:04:36

thanks Denis

23/12/2017 12:34:41

Hi all,

I have a Trablet plan of Auster AOR 9 1/5 scale 81" wingspan I was thinking of putting a Saito 62fs engine, the plan recommends 40 to 61 two stroke .Would Saito be to under powered for this plane.

thanks

Thread: Ripmax Chris Foss trainer help please
12/04/2017 08:41:10

thanks all for the replies, interesting results well check all, if I cant get it sort out will go for a seagull boomerang,

10/04/2017 18:43:41
Thanks all for the replies, have put engine at correct place now ,will be interesting to see the next flight
10/04/2017 17:03:49
Just had a look at the engine mount, and they have been put on below the original mount points, would this give me the ballooning effect when throttle is increased
Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Pepe Aircraft
Gliders Distribution
CML
Wings & Wheels 2019
Slec
electricwingman 2017
Cambridge Gliding Club
Advertise With Us
Sarik
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us