By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for martyn sharp

Here is a list of all the postings martyn sharp has made in our forums. Click on a thread name to jump to the thread.

Thread: To BEC or Not to BEC?
15/02/2008 12:55:00

Nick that is a really nice model by top flite and you have done it justice ,if you wife dose read this she can be prould of what you have done but please lisen to Timbo I have been following the thread he referd to and i have learnt so much from it. You must try and get someone to vidio it flying then send it to dave to add to the RCME video clips.

so well done 

Martyn  

Thread: My FW-190
15/02/2008 12:44:00

Nice very nice can you give a few more details like ,what paints you used  and plan or did you do it all from the undercarrage up

Martyn 

Thread: Spotted at Nuremburg....
13/02/2008 16:28:00

you mean you did,nt  fly!!!!!   

Martyn 

Thread: Battery packs won`t charge
10/02/2008 10:14:00

Hi chris i had the same problem and it was my feed battery i got myself a mains feed and all was fine  i was geting 12 v olts on the meter but understess not a lot

Hope this helps

Martyn 

Thread: New boy crashed already!
06/02/2008 09:04:00

you could use an  2 part epoxy for really stressed areas use a longer setting pack 30 min minimum or a glue gun

Martyn 

Thread: Hangar 9 B25
06/02/2008 08:59:00

Looking good peter i have got the hanger 9 sothworth cammel yet to build its intresting on the comments to dull it down also have you got a link to Sun High Battery ( hope thats ok Dave ) if not could PM me with it.

Martyn  

Thread: Looking after your LiPo cells
02/02/2008 16:39:00

Thanks Timbo that will be really useful

Martyn 

Thread: The February Grand Prize Draw
01/02/2008 11:30:00

The last time i saw a tiger moth attacking a battle ship was on an open day a few yeas ago at Marlborough flying club   (ww1 flying day )

Martyn

Thread: Futaba FAAST: important announcement (from Ripmax website)
18/01/2008 07:23:00

I guess this is where we see the benifets of a forum like this it can reach so many more within hours. Thanks for the update Gary and David for acting so promply to geting it on the home page. maybe the BMFA should have a area on this forum to keep members abreast of any problems  

thanks  

 Martyn

Thread: Pick a plane 2008!
11/01/2008 13:54:00

Hi dave i guess my choices would be

 1.Sea vixen (EDF)

2.PBY Catalina (electric)

3.VC10 (EDF)

regards

Martyn 

Thread: New articles
27/11/2007 09:53:00

I hope I’m in the right section for suggestions for articles I would like to see one on taking a model from scale drawings to planes and then to a model perhaps Tony could help here also getting your model parts cut by CNC

Martyn  

Thread: New RCM&E Sunderland Flying Boat
07/11/2007 16:52:00

Thanks Tony best start saving for those motors and lipo,s and I guess the plan and CNC wood pack  

Martyn

06/11/2007 20:06:00

how long is the flight duration tony  I,m asuming the lipos are 3s but must admit it would be nice with retrats

Martyn 

03/11/2007 17:59:00

 Tony that is lovey plane  I have always love the plane had the Airfix kit of it when I was younger. I am in Poole and there is a history on them landing and taking off in Poole harbour 

well done

Martyn 

Thread: ESC
29/10/2007 12:54:00

 have a look on this site http://www.modelflight.com.au/manuals_general.htm   to see if they have a manual for your esc that will help.

Martyn

Thread: just a question on Batteries
22/10/2007 11:29:00

Sorry guys I’m dyslexic normally  write things out in word but was in a rush the morning I’m sure I meant utilizing but there again !!!!!!!!!  

Martyn

19/10/2007 07:31:00

 Thanks Timbo I guess I was on a  bit of a hiding, yep your right got by "c" and "s" round the wrong way. most of the brushless motors seem to need a 3s 11.4v well on the biger models anyway. and yes it was lipos.

Back to the drawing borad I was just trying to save some money by uterlzing batteries .

Martyn 

17/10/2007 12:28:00

  I was lucky enough to been given a Hanger 9 Sopworth camel and in the instruction it shows two 2c1p 7.4v batteries wired together to provide  14.8 but with a high Mah also I have a p38 lighting I believe it’s the one from sola models that requires the equivalent to 2*.15 I.C I  am hoping to get 2*TowerPro A2409-12T (200W) Brushless Motor (Tractor) & FLY 25A ESC Combo from BRC hobbies also they have 6400 Mah 7.4 batteries so I guess my question is will the batteries be able to power the P38 motors on the 7.4v individually as well as the camel wired together to product a 14.8 12800 Mah . I’m new to flying electric so any help is appreated  

Martyn   

Thread: VC10 plans or drawings
21/09/2007 19:02:00

Hi keith i flew on VC10's as cabin crew in the RAF for 6 years and love them. I to have been looking to do the same build, a EDF model have you got an update on how you got on

Martyn

Thread: Fledgling
20/04/2007 10:50:00
I Have the same problem with this trainer brought it with the brush-less motor only to find no help on the engine mount any charnce of some photos of how you set yours up

thanks

Martyn
Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Slec
Wings & Wheels 2019
Pepe Aircraft
Cambridge Gliding Club
Gliders Distribution
electricwingman 2017
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us