By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for martyn sharp

Here is a list of all the postings martyn sharp has made in our forums. Click on a thread name to jump to the thread.

Thread: I am tempted
08/07/2011 13:11:17

If its tool station it will be good it run by the same guy who stated screwfix befor B&Q took over the tools i have had from there have all been good
 
Martyn

Edited By martyn sharp on 08/07/2011 13:11:41

Thread: Yorkshire
22/06/2011 17:21:24

Thanks Guys, Ken i saw the website of arrow models seems to have a lot of stock, I hope its all there it seems some shops avertiste a lot but order it when you order on line dont stock the goods
Lee about 8 days at the moment
 
looking forward to it been busy the last 18 months
 
Martyn
20/06/2011 18:51:42

Hi We are of to Yorkshire for some time mostly York, Scarborough and harrogate and wondered if there are any model shops worth visiting also whats the weather been like in the area
many thanks
 
Martyn
Thread: Fred Keegan.
19/06/2011 15:48:57

so sad i will miss Fred's contributions i followed his build on the sunderland closely as Tim says another one gone
my sincere condolences to his family and frends
 
Martyn
 
Thread: DSMX transmitter recall
11/06/2011 10:45:16

I really like my dx6i and dx8 but is seems to me that in there eagerness to place items on the market full testing is a little bit lax i'm going to lose both my transmitters for a week or so and the dx6i has been recalled before as were the 500 receivers as things get more complicated the more to go wrong . I wonder that if a plane now dos some damage to a person or property and you had not sent it back for an upgrade who would pay the insurance if Geenacres are talking to the BMFA about it must be some concern over it
 
Martyn
Thread: Are you sniping?
10/06/2011 05:26:25

It might be a Mick revees snipe glider, had one years ago it was a realy good for all types of flying you,v been lucky there
 
Martyn
 
 
Thread: Want a build project?
04/06/2011 20:25:26
Posted by Tim Mackey - Administrator on 04/06/2011 20:10:59:
And an electric conversion would not break the bank these days. I reckon I could spec something up for that thing for around £100 or less.
OK but how much would the bits cost lol
martyn
Thread: Spot the Plane 2
27/05/2011 20:27:57

21 for me
 
Martyn
Thread: Thanks from the Seagull Edge 540 winner!
26/05/2011 09:58:41

Enjoy pete and congrats
 
Martyn
Thread: a quick freebie
25/05/2011 14:01:25

Got the book thanks David . Hi VA sorry i beat you to the post but if you give me a cupple of weeks and PM me your address i will send it on to you no reson we both carn,t enjoy it I can photo copy the relevent parts i need
 
Martyn
 
 
Thread: HI
25/05/2011 11:38:49

Hi paul and welcome there is so much help around om this forum .
 
Martyn
Thread: Brushed ESC and lipos
24/05/2011 19:10:03

LVC = low voltage cutoff this is the point that the lipos acan safly be discharged in order to be then not to be damage and can be recharged . brushless ESC you can set this so at low power it will stop the Motor but will continue powering the BEC conecting the recever . so on a brushed setup if the lipos drop to much then the power to the reciver may fail and you are left with a uncontroled model .I have a brushed setup on my twinstar but have the reciver and servods on a seperate battery but still time my flights so not to run the lipos down to much
 
hope this helps
 
Martyn
 
sorry TIM cross post

Edited By martyn sharp on 24/05/2011 19:10:50

Thread: a quick freebie
23/05/2011 15:40:09
mine please
 
Martyn
Thread: The 'spot the plane' competition
23/05/2011 08:05:29

well you could put one on line and one in the Mag for postal or email entrace
ether way its fun and after all thats what the hobby is about  
Martyn

Edited By martyn sharp on 23/05/2011 08:06:04

Thread: 12-am and off to maternity
21/05/2011 16:03:25

congratulations to you and Mrs DF only 29 hours with out sleep more sleepless nights to come she looks a little darling
 
Martyn
21/05/2011 07:03:09

hope all is going well
 
Martyn

Edited By martyn sharp on 21/05/2011 07:09:50

Thread: The 'spot the plane' competition
20/05/2011 07:45:24

ok number 16
 
(well done DF)
 
Martyn
Thread: Blackbushe Model Airshow
15/05/2011 15:34:23

It was a realy good day good flying (bit windy) and stalls fell in lust with a lecy stuka bu at t £200 well ! . 4 max was busy all day managad to get some crimpers and bits.
Martyn
Thread: How do I connect my motor?
06/05/2011 09:20:06

Andy what I do when I get the wires sorted I put a bit of heat shrink and match the the same colours in the motor and ESC I use the same colours across the range then I can the right direction on all my Motors
 
hope this helps

Martyn

Edited By martyn sharp on 06/05/2011 09:21:05

Thread: Pound Land Edwards Epoxy
05/05/2011 07:53:56
Posted by Geoff Smith 1 on 05/05/2011 07:49:55:
Message to the Mods. I'm losing some of the text in this topic under the ads again.
 
Geoff
 
AKA Webiteer No: 20
me too at home and at (work)
 
martyn
Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Slec
electricwingman 2017
Wings & Wheels 2019
Cambridge Gliding Club
Pepe Aircraft
Gliders Distribution
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us