By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Marko

Here is a list of all the postings Marko has made in our forums. Click on a thread name to jump to the thread.

Thread: magazine subscription
16/02/2014 18:48:06
Hi Pete thanks for your reply pity there is no unsubscribe button instead .l unsubscribed from Netflix should have run until 8 feb l can still watch it so it never did get cancelled have to keep checking l guess
thanks .......... mark
16/02/2014 18:22:44
Hi all does anyone know how to cancel the magazine subscription can't seem to find any info ,only how to subscribe !! and l never ever got a free gift even though lve been subscribing since 06
thanks for any help ........mark
Thread: Brian Taylor spitfire
26/11/2013 15:24:45
Hi Ben no it's the 69" one lve got the fuz is epoxy the wings l have are made in foam and not really that good so l am making them using the Brian Taylor set ,got a really nice set of retracts ,more pics soon as I've remembered how to post them correctly !
cheers ....... mark
19/11/2013 15:25:15
hi regarding my spitfire build of which I''M splicing the retlas fuz to the Brian Taylor wings ,here is a pic of what''s been going on .Ive got more pic so I will put more on soon .... marko
Thread: spitfire covering
14/10/2013 18:41:15
Hi geoffrey all depends on how true you want to make I guess ! . What "Mk" is yours as that narrows it down a lot !! some early mk's were half black and half white down the middle ,some duck egg blue, or sea grey, got any pics
Thread: retract servo vs digital servos
14/10/2013 17:22:37
Thanks guys for all your responses I'm off to unitracts in the morning as they make a set for the Brian Taylor spit !!! I've heard they take a while nowadays cheers all .......... mark
Geoffrey do you have the web address of yours ????
14/10/2013 12:37:39
Hi all thanks guys for your replys as I've never used a dedicated retract servo I wasn't sure of there advantage !! you have all made good points cheers .one more from the daft question dept , would I need one servo per wheel ??? as in Dannys pic/vid ta very much ...... mark
13/10/2013 23:40:49
Hello Danny lm glad you answerd first your straight to the point thats exactly what l thought the servo setup you have is simple cheers lve got some in mind l can use
cheers again ......mark
13/10/2013 22:29:33
Hi all whilst I'm building my spitfire wing I'm now looking to install the retracts . I'm building the Brian Taylor 69" off the plan and using unitracts mechanical units , but what is the benefit of using a dedicated retract servo which isn't proportional against say a normal one which is any views on this would be great
Cheers ....... Mark
Thread: Brian Taylor spitfire
28/09/2013 19:46:03
Hi to all ....
I know I said lm not flying anymore but I could not resist one more build so .... lve had this Brian Taylor 69" wing span kit so I thought why not anyway the retracts I've got are not suitable so they are up for sale to anyone who wants them they are in the classifieds
Thread: This is the end
02/09/2013 20:20:12

HI BEB thanks for your nice reply ha ha yes I will be back when i get the itch again Ive got other things going on at the moment so for a long time flying took up to much time so who knows ........I will sell my planes and start again

HI Roy dont be shy matey ,the Chipmunk is the black horse 62" and its unflown !!.................... PM me..........and I will tell all

thanks ..........marko

02/09/2013 18:33:19

Hi to all as the title says "this is the end " The last 2 years Ive not been flying much ,well very little .as my job opened up a new opportunity to use my skills to make plugs and molds ,some for boats and planes ,so for now I am quitting flying and as a result I have various planes for sale,see my album (planes for sale)some new and some used you have all been gents over the years when I was learning to fly so its only right I give you guys and girls first choice xxx

so for now unless you want a oneoff mold made for your plane (email me)

this is all for now

Thankyou all very much for the best web site going .............marko xxx

ps I will be back

Thread: Phoenix Online Session
19/11/2012 23:29:10
hi all l havent been around for a while lm looking into getting this pheonix flight sim what are you guys running on as l wanted to connect to my pc tv but l cannot really move my computer will this sim run from a laptop
thanks for your help
marko
Thread: Some advice on my Spitfire please
08/08/2011 23:25:55
Hi all
Hi Ben nice looking spit you have there
To answer your question .... your spit ,looking at the serial
number puts it as a Mk11a from 71 eagle SQD which flew out of North Weald in Essex cheers ..........marko

Edited By Marko on 08/08/2011 23:30:40

Thread: Building my new Fournier RF-4
06/06/2011 21:40:25
hi all .............
nice build pics,,,,,,, whilst the issue of the double sided plans is being sorted .
l think ive spotted another missing part in Peters build pics , it clearly shows there being 8 formers but on the mag plan there is only 7 / F2 with the rectangle cut out (in pics ) isnt there ,do you think it might show up on the wing plans !!!
 
ps is there going to be a cnc kit for this and if so how £££
 
 
cheers..................................marko
Thread: foam wings
28/03/2011 22:50:35
Hi Douglas ring the Balsa Cabin they have some in stock (Copys of course) but very nice indeed

marko
Thread: SC 36 is something missing??
28/03/2011 22:45:42
Hi Dean if you look at the back of your engine that's where the needle valve would be with this set up , the blanking cap on the carb is there because the needle has been moved to the rear of the engine ,the feulmpipes seem to be attached to something ? your pics a bit dark so can not see what you have .
Some people like the needle valve at the rear as it's keeps yer pinkies out of harms way !!!

Hope I've helped. marko
Thread: Just Engines again
28/03/2011 15:18:56
Hi all ...... I ordered a genesis pipe from just engines on Friday then got a phone call from Paul on Sat to confirm my order ,is my engine 2st or 4st l confirmed it was a 75 2st job done , today l had a call from Jenny to say that they are out of stock and would l like to wait until it is in stock .Jenny then offered me a manifold and pipe for the same price which l excepted . Now .... for a company that is upside down in moving down south ( long overdue ) a bit more east wouldnt have gone a miss ! I think that's very good service so l would like to thank just engines for possibly being one of the better shops out there !!!

............. marko
Thread: Tank Size.
18/03/2011 12:35:01
Hi doug would that not depend on the three variables ........
weight
Drag
and thrust
give us some more info in which plane you have got , high wing , low wing . what type of plane , pics are nice
so as for your question any tank will give you ten mins of flight time , but it could be a question of " how do you want to fly"???

marko
Thread: Don't just stand there, get one up!
17/03/2011 12:25:39
Hi Danny can you give us a plan view of those smoke stacks ? something is bugging me , not sure what it is yet

well you did ask !!

marko
Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Wings & Wheels 2019
Slec
CML
Cambridge Gliding Club
Pepe Aircraft
Gliders Distribution
electricwingman 2017
Sarik
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us