By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Mowerman

Here is a list of all the postings Mowerman has made in our forums. Click on a thread name to jump to the thread.

Thread: Forum members' new models: Let's see them.
24/06/2017 15:53:51

Nice idea Peter.

Thread: tony nijhuis f15 and eurofighter plans wanted
23/06/2017 11:55:14

Hi Duncan

I have the plan, if you PM me your postal address I will send it to you, in payment just put a couple of pounds in SAFFA.

Roy

Thread: 'Drones' at he America's Cup
20/06/2017 14:26:40

Watched some of this on TV, amazing they are not so much sailing as flying low.

Thread: Completed Ballerina's Gallery
12/06/2017 16:24:06

I managed to Paint the pilot but do not look too close.ballerina pilot and decals.jpg

12/06/2017 16:22:17

Now have decal and pilot figure so ready for maidenready for maiden.jpg

Thread: Hammond crashes lithium powered car, large fire
11/06/2017 08:06:52

Back to the driving school Dicky ?

Thread: Completed Ballerina's Gallery
06/06/2017 10:48:32

Trevor

I thought about doing it that way but me hands are far too shakey to do that. I made the mistake of buying an unpainted pilot figure, disaster, now I will have to buy a ready painted one.

04/06/2017 15:36:27

Hi ifly2

Thanks for that just ordered.

Thread: Depron Aerobatic Model
03/06/2017 16:06:39

Tony 507 views shows that peoples are interested in own design and use of depron. Keep up the good work.

Thread: Completed Ballerina's Gallery
03/06/2017 15:58:20

iI2fly

where did you get the decal for the fin?

Thread: Pics from your free RCME plan build
01/06/2017 22:30:03
  1. Ballerina just finished. waiting flightBallerina

Edited By Mowerman on 01/06/2017 22:32:26

01/06/2017 22:25:14

My Jocasta flown successfully.Jocasta.jpg

Thread: Unwelcome Visitors
31/05/2017 15:30:57

Think your self lucky they are not wasps or hornets.

Thread: Somewhere to share our own 3D designs
30/05/2017 14:17:19

That is looking good but I can't help feeling ,why? Apart from an exercise in using the system how would it compare with balsa weight wise and how much would it cost to print. Notice I am ignoring the design/drawing time

This is not a criticism, just interested and intrigued.

Thread: How many plan-built models have you made or started in the last year?
22/05/2017 15:02:54

Just the Ballerina, decals and pilot to finish off then flying.

OOPS duplicate post.blush

Edited By Mowerman on 22/05/2017 15:06:28

Thread: Soldering Iron Recommendation please
21/05/2017 15:41:36

Got my 80W iron from Farnell £30.35.A bit pricey but good quality from reputable supplier. Also got 21 swg tinned coper wire, 250g £8.34. Just the job for u/c work.

Edited By Mowerman on 21/05/2017 15:43:04

Thread: Forum members' new models: Let's see them.
20/05/2017 22:10:38

My Ballerina is finally finished, apart from decals and pilot figure (any suggestions on source of suitable ones)

The maiden may by a few weeks away as I get very few opportunities for flying these days.Ballerina

Thread: Teesside Model Flying Club Airshow 2017
15/05/2017 14:38:26

Sadly I will not be able to attend this year (having been three times in the past) but I would recommend it to all. Great show, Great value.

Thread: My indoor Version
11/05/2017 09:42:20

You have now built quiet a range of models of the mini jet and all look and fly great. Perhaps the next one could be half full size for a turbine?wink 2

Thread: Whats flying over your shopping centre
30/04/2017 10:58:18

Hi Tipsy, That's fine for cigarettes but they tend not to get onto the 'pre-used' market. Drones often are sold as used so often without the original package and sadly without the guidance on legal use.

As for the Highway code, at least drivers should have passed the required tests in order to have a licence and driving without a licence can lead to arrest.

Latest Forum Posts
Support Our Partners
Sussex Model Centre
electricwingman 2017
CML
Slec
Sarik
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!