By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for jantrit

Here is a list of all the postings jantrit has made in our forums. Click on a thread name to jump to the thread.

Thread: Seagull Boomerang Tail Dragger Conversion
17/11/2008 01:37:00
I wouldn't say changing to a tail dragger configuration was cheating, its just different. I find tail draggers just as simple to land as a trike gear set up. I went from my trainer to a 3d low wing taildragger and could land it quite smoothly on the first flight, not really noticing a difference the landing just kind of happened lol
Thread: Weekend 16 & 17th Aug
16/08/2008 20:30:00
flew my Wildcard in london today, very light so is difficult to land in these winds, but thats what makes it interesting
Thread: SC 52 2-Stroke keeps cutting out.
06/08/2008 11:06:00
Well I am very pleased to say that it is running well, I replace the clunk line and that seemed to stop the problems (touch wood) this engine has bags of power when its working, gives me unlimited vertical on an irvine wildcard . What would be the best run in procedure for one of these engines from new, as I am considering getting another one ( that power really is addictive) Thanks MIchael
09/07/2008 18:00:00
Thanks, yes I had planned to visit a model shop out there , although having just bought a dx7 my wallet is feeling the pain lol.
09/07/2008 16:08:00
Thanks for all your help guys. Yes the engine is installed about 30 degrees off inverted so that the exhaust goes down the center line of the fuzz. I am not using the remote needle as the carb that jen sent me had both needles up front, so I just bypassed the old remote needle mount and went straight to the carb with the clunk line. I will replumb the tank, have a good look at the carb and clean everything out. What are the manufacturers settings for this engine? i.e how many turns on each needle. Yeah everyone at my club has great luck with the sc's so its just me thats been having problems I am using a three line system, when i changed to a new tank I was going to only use two line , as I love the simplicity, but I found that the bung had all three holes punched out already. The third line it hanging out through the firewall blocked with one of those fuel line pincher clip thingys. The club member who owned this plane before has kindly donated the engine that he used in it, so that I can see if its the engine or tank set up, I will try this if I have no luck with your suggestions. I am off to the states tomorrow so I will not get a chance to test it out for atleast two weeks. I will however post up the results when I have them. Thanks Michael
09/07/2008 10:50:00
Going by that it must be the tank position, but the tank is level, if a little high due to the semi inverted engine. The problem is there is no other place for the tank to go it literally just fits in the cavity with no spare space, it ran fine when the previous owner used it ( with a different engine) so my thoughts were that there was something fundamentally wrong with the engine itself. thanks for your help Michael
09/07/2008 00:17:00
Im having the same problem, with the same engine. Its in an irvine wildcard if anyone could help that would be greatly appreciated, heres the story: Firstly I ran 3-4 tanks through it, took it to the field and flew it around at about half throttle (would splutter if you messed with the throttle setting to much, although I expected this from a new engine) Then the problems began it started to cut in flight, some of the more experienced guys at the club had a look at the needle settings but still it would cut in flight. Then one of the guys had a look at the carb as it was sticking, and solved that problem. Then the high end needle fell out in flight, by this time I was about ready to go all electric. Then the threads on the bolts securing the carb stripped, so I bought a jen carb, they sent me the carb with the non-remote high speed needle. As I didn't want to wait around I fitted that carb and ran the fuel tubing from the tank straight to it. I also replaced the tank as I suspected a leak. With a brand new tank and carb I was sure that I had fixed all of the possible problems, and yet this time I couldn't even get the plane into the air, it would run perfectly on the ground , in the pits, but cut as soon as you added throttle to take off (this had happened a bit before the new tank and carb, but the plane would atleast recover and head skywards) By now I think this thing is scared of heights or something, Sorry for the long post but if anyone had any suggestions that would be hugely appreciated. Thanks Michael
Thread: A little competition for forum users
30/06/2008 22:43:00
Enter me please. Thanks Michael
Thread: Wings and Wheels at north weald
29/06/2008 01:11:00
I think Im in love with my Dx7. The short skirted one offered me 10% off something.... no idea what though
28/06/2008 18:54:00
Was good, the first show I've been to. Picked up a nice Dx7 to play with
Thread: This weekend 26-27 Apr
26/04/2008 14:57:00
The sun is shining, the weather is sweet, just about to leave for the field.
Thread: The May issue Nijuis free plan teaser
02/04/2008 16:32:00
go on then
Thread: Weekend 29-30 March
30/03/2008 20:15:00
Got to the field at about 2, beautiful weather nice and warm and sunny hardly any wind. My engine just wasn't having it, tried turning it every which way but nothing helped. I got some help from an experienced member who took apart the carby and re engineered it ( by this time it hadn't been working for about 3 hours) so then we tuned it back up. I took off started flying it around and the engine cut, I managed to get it down into the next field and when I went to collect it the high speed needle valve was nowhere to be seen. Any one know where I can find a needle valve for an sc52 with rear mounted needle?
29/03/2008 20:04:00
I've got my batteries charging in the hope that it will be fine tomorrow , doesn't seem likely but a guy can hope can't he
Thread: Thunder Tiger 40 cowl
11/11/2007 21:40:00
When i assembled mine it just used a dremel to cut it to fit and then managed to slide the engine in and put the whole assembly onto the plane, i have since cut the join and the top rear of the engine to allow it to be removed without taking off the engine. I have been flying the plane solo for about 3 weeks now and i can say it flys great , very light and floaty.
Thread: How local is your 'local flying field'?
10/11/2007 12:12:00
I fly in london so i travel about 25-30 miniutes depending on the traffic, the club is very nice in a great location with great people, waht more could you want.
Thread: Newbies
04/08/2007 20:11:00
well i just got back from the club, it was awsome really friendly people and a great location, had about four flights, and started final aproaches on the last one. great fun , i can't wait to go again.
24/07/2007 01:10:00
yeah i just got an email back from the guy at my local club telling me to come along and bring my model, wow im so exited
Thread: RCM & E Back Issues Help Please !!!
12/06/2007 00:33:00
ill have a look through my old mags and see what i can do
Thread: Young fliers
12/06/2007 00:29:00
hi im 15 just started out with model flying (started with a car about 2-3 years ago,becasue i didnt want to crash alot) got a tiger trainer .40 that ive built( constructed really) and im trying to find a club that will teach me to fly.
Latest Forum Posts
Support Our Partners
CML
Sussex Model Centre
electricwingman 2017
Slec
Advertise With Us
Sarik
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!