By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Bruce Richards

Here is a list of all the postings Bruce Richards has made in our forums. Click on a thread name to jump to the thread.

Thread: Prop sizes for 2 completely different engines.
02/06/2010 08:54:07
Prop size chart can be found here.
Thread: I am a Crasher
02/06/2010 08:00:08
That's a good point David. There are several time I have turned up to the patch or indoor hall and decided that my state of mind was not conducive to safe aviation and chosen not to fly. I just sit, chat and watch others trying to learn from what they are doing. This is normally because I am feeling tired and my brain  is just operating too slowly to keep up with flying a model.
 
I have also found that If I have had a drink, even a single glass of wine, my ability to crash is much enhanced. I think this is due to me being less inhibited and willing to try things that either I can't do or are physically impossible.
Thread: Prop fixing
01/06/2010 22:17:15
Yes just cut it to the length you need.
01/06/2010 20:08:41
Does the collet go fully home on the motor shaft or does it jam up before the shafted goes fully in? If it jams up the collet is the wrong size for the shaft.
Thread: I am a Crasher
01/06/2010 19:27:14
Phil, I did a lot of crashing while practicing for my 'B'. But sopped now. All I would ay is try to learn a lesson from each crash you have and do not repeat the same crash. Soon you will run out of ways to crash
Thread: Pix - E Major
01/06/2010 12:08:07
Looks sweet Tim. I bet it flies really slowly.
Thread: Senior Telemaster Barn Door Wing Build
01/06/2010 08:14:10
Good Luck David. I am sure you can do it, it just depends how much sleep you need.
Thread: High or Low
31/05/2010 10:53:13
Stephen I hope you are on commission
Thread: Li-Po Repair
30/05/2010 08:28:17
Simon are the tags on your cells aluminum and if so did you use any special solder or soldering technique?
Thread: Ally Cat
27/05/2010 19:06:10
Dusty, click on the link "EDF Ally Cat" at the top of the thread to see the foam delta EDF that is the subject of this thread.
Thread: Model Glasses breakage
26/05/2010 16:05:03
A big THANK YOU to John at Rapid Eyeware (Model Glasses). I broke my glasses again, all my own work this time. However he was happy to provide me a new set of frames at a very reasonable discount from the cost of a new set of glasses
 
Great service
Thread: Battery for EDF
26/05/2010 15:51:46
A club member did have a problem with using 3s battery on an ESC specifying 4-6s. The problem was that the ESC saw the 3s pack as a flat 4s so the LVC cut in and backed off the speed and thus he never got full power from the motors. This was on a big 4 engined model and nearly ended in disaster.
Thread: 2 cell LIPO saved from 1v!
26/05/2010 15:38:07
How many charge discharge cycles have you been through since this incident? I would be interested to know how much longer it will last.
 
I suggest you keep a very close eye on it when you charge it from now on.
 

Edited By Bruce Richards - Moderator on 26/05/2010 15:43:10

Thread: Typical Flying Speeds
25/05/2010 19:24:06
i2fly I deleted your table it destroyed the thread format. Maybe try again but type in the table rather than cut and past.
Thread: Kyosho 'Calmato' Sport
25/05/2010 17:14:50
You can find a parts list here. You may be able to get these guys to get spares for you.
 
Just an idea. Good luck
Thread: DS Record pushed to 445mph!!!
25/05/2010 16:59:26
What a noise the model makes on that first You Tube video. Fantastic.
Thread: Any good shop in London (not to far from the underground)
25/05/2010 16:49:42
What about Als Hobbies 200 yards from underground station.
Thread: Digital Issues
25/05/2010 14:41:17
Much easier to use but the quality does not appear to be as good as the old one. The text is not as sharp and the pictures have some distortion on hard diagonal lines. Still very usable though and a great resource.
Thread: Music to video
25/05/2010 12:11:42
I am with Kevin. Leave the sound track alone. At least 50% of those watching will not like your choice of music and some such as me would prefer none.
 
Alternatively do what pleases you, those watching can always either turn the sound off or stop watching. 
 
If I am not careful I will be having a good old argument with myself here.

Edited By Bruce Richards - Moderator on 25/05/2010 12:12:29

Thread: August Nats
25/05/2010 07:50:37
I think you are early. They will be published in the BMFA news soon. I have never been able to find them on the web site but they are probably there somewhere at some time.
Latest Forum Posts
Support Our Partners
Slec
CML
electricwingman 2017
Sussex Model Centre
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!