By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Bruce Richards

Here is a list of all the postings Bruce Richards has made in our forums. Click on a thread name to jump to the thread.

Thread: Converting model to 2.4Ghz on Futaba
06/09/2010 16:14:15
Discussion of compatible Rx Here.
Thread: Phoenix
05/09/2010 16:12:25
Another vote for RC Planemaster. It is good value for money and does all you need as a beginner.
Thread: epioneer nose wheel steering and esc
05/09/2010 15:41:46
In that case use a Y lead and connect it with the rudder to the rudder channel.
05/09/2010 13:32:14
Nose wheel can be operated from the rudder servo. use a hole closest to the centre of the horn to reduce stress on the servo. You need to make sur the wheel turns in the right direction and you may need to use the other side of the horn from the rudder push rod to achieve this.
Thread: RCM&E 2010 Hobby Awards
04/09/2010 13:39:46
1.  Phoenix MP
2. Giant Cod
3. Wot 4
4. Horizon
Thread: Hawker Nimrod Balance points?
03/09/2010 10:20:31
Yes the balance point is in the same place but scaled up. Sound like you need some nose weight to balance slightly nose down, which is the preferred attitude.
Thread: Nats 2010 - whos going, pics, video...
30/08/2010 21:58:00
Nice to meet up with you all.My son is called Michael if you are interested. He does not play around here with the old men.
26/08/2010 10:08:41
I'll be there with Michael my son.
 
 
Thread: Evolution Models
21/08/2010 17:30:45
I have built one of the original Fusions. Its a good model and Gavin is very helpful and replied to all my emails. Their web site is half there looks like they have a problem at the moment.

Edited By Bruce Richards - Moderator on 21/08/2010 17:32:50

Thread: Taking Off And Landing
21/08/2010 09:31:31
I think the problem here is about interpretation and enforcement of rules. When the club atmosphere is friendly, open, cooperative and flexible all these problems disappear. It's only when you get  an over zealous individual trying to tell others what to do that problems occur. It's for more about attitude that its is about this rule or that rule.

Edited By Bruce Richards - Moderator on 21/08/2010 09:31:46

Thread: Battle of Britain Day 15th Sept
19/08/2010 19:43:32
That is a great idea. My son has just finished a YT International Spit (not flown yet) and I have a Ripmax Spit to build. I am sure I can get it done before then.
Thread: Advice about Flair Magnatilla
19/08/2010 09:31:06
I agree with everythingMartin says above.
Thread: Taking Off And Landing
19/08/2010 09:29:12
I almost always stand in the pilots box, or close by, for take off and landing. For hand launch I will stand out on the patch to launch into wind. I think it is good practice to be able to control your model while standing to the side.
 
No criticism   intended just how I do it.
Thread: Greetings
18/08/2010 09:12:07
and me! Have fun.
Thread: prop nuts on 4 strokes
16/08/2010 18:38:04
Yes. I have not seen this before but it will certainly help to lock the domed nut on to the end of the crankshaft.
Thread: Where to buy fuel?
14/08/2010 09:26:22
I always stock up when I go to a show. I bought 10 gallons from Southern Modelcraft at Wings and Wheels. I find you can always get a good price if you are willing to buy a few gallons. Last year I bought 7 Gallons form Model Techniques at a very reasonable price at Hop Farm.

Edited By Bruce Richards - Moderator on 14/08/2010 09:26:37

Thread: Repairs to 4S cylinder head
13/08/2010 13:32:10
Thread: Nats 2010 - whos going, pics, video...
12/08/2010 21:04:54
Tim Morton, there is an application form in the MFA News to buy tickets in advance. I have got mine. Hope the weather is good
Thread: c of g help for all
12/08/2010 18:38:27
Stick it at 110mm and see how it flys would be my suggestion.
Thread: Nats 2010 - whos going, pics, video...
12/08/2010 18:19:47
I seems to depend very much on the weather but I have see it both on Sunday and Saturday evenings. Great fun!!
Latest Forum Posts
Support Our Partners
CML
electricwingman 2017
Slec
Sussex Model Centre
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!